f50 plus 20" bbs

I have a few questions/issues regarding my wheel setup. I want to keep the fenders/panels stock and will be lowered on coilovers.  My goal is to have the wheels flushed with the fenders/panels and don't want to run any crazy amount of  camber. What I need suggestions on is the tires size and if I can reach my goals. The specs are 20x10 +12.[ATTACH]5596[/ATTACH]

Get different wheels. If you don't want to camber and roll/pull your fenders, it's not going to happen.

I"ll decide once I lower the car, but I hope I can make it work.

[QUOTE]what mow said, those are just out way to far, I like the rim style though[/QUOTE]

[QUOTE=obese;507844]I"ll decide once I lower the car, but I hope I can make it work.[/QUOTE]

[img]http://www.imcdb.org/i618099.jpg[/img]

Hope your name is Jody.

Once you lower your car and stretch some tires on them, you'll be fine with alil pull

Tire size you would to go with a 225/35 or a 235/35 for a milder stretch ...what kind of bbs's are those they don't look like LM's

[QUOTE=ray316;508833]Tire size you would to go with a 225/35 or a 235/35 for a milder stretch ...what kind of bbs's are those they don't look like LM's[/QUOTE]

 The wheels are one offs, but very close to lm's. Thanks for the advice.

I think you'll be fine. the pic is on stock unloaded suspension, fitment will be very different on coilovers. you won't get a ton of camber on a McPherson setup without a bit of work anyway. my suggestion is get the suspension on and test fit with the suspension loaded, then see where you're at.