Fitment question for 2005 ls430

What would it take to fit 20x9 +18 with 225/35-20 and 20x11 +14 255/30-20?? LS430 is a new chassis to me so have no clue what fits


Sent from my iPhone using VIPStyleCars

[QUOTE=dkang80;512820]What would it take to fit 20x9 +18 with 225/35-20 and 20x11 +14 255/30-20?? LS430 is a new chassis to me so have no clue what fits


Sent from my iPhone using VIPStyleCars[/QUOTE]

are you on coils or air?

Fronts should be able to fit with a shave and roll. Rears would need work, shave and pull, or shave and camber. depends on if you wanna do body work or leave stock and use camber arms. But for sure will not tuck fender in the rear without body work. I am running 20x10 +8 235/30 and 20x10.5 +15 245/35. When i air out it sits on lip.

also be sure your wheels will clear your big front brake calipers. they are pretty much considered a BBK so hi pad wheels are a must, or run spacers (not ideal).

fronts yes, rears no, but as stated above ensure they'll clear the bbk

My fronts are 20x9 et21 235/25/20 with plenty of room in the front no fender work done. Any lower of an offset would need a roll or shave. You can also run a 225/35 with a et18 but will probably have to still roll/shave. 

To fit the rears you'll most likely have to roll/shave and pull. Or shave and camber. Have you considered running a 245/35 tire? 


Sent from my iPhone using VIPStyleCars

My plan is coils I also have a back up set of r35 gtr wheels I might run which is 20x9.5 +25 and 20x10.5 +25 running 245/35 front and 255/35 rear


Sent from my iPhone using VIPStyleCars

can i run 20x9.5 +45 (245/35-20) and 20x10.5 +25 (255/35-20) on a stock set up. I can run a 20mm spacers up front to make it +25

[QUOTE=dkang80;512945]can i run 20x9.5 +45 (245/35-20) and 20x10.5 +25 (255/35-20) on a stock set up. I can run a 20mm spacers up front to make it +25[/QUOTE]

stock set up as in, stock height? the rears might poke a little.