Redstarz808December 17, 2014
#514071My vipdout inspired vip trays
Just wanted to share my projects. The back seat tray is like the triple rear tray that vipdout makes. I don't have a table saw or good equipment so I had to make all these cuts using a jigsaw and sand by hand. Think I did a pretty good job. For this, I used 1/2 inch plywood and applied some ebony wood stain and varnish to give it the gloss. Around the sides are 1/2 inch chrome flex molding. And I was able to get the chrome holders for the bottles thanks to James Church of vipdout. The LED tray I made was a simple box design, it has LED ice cubes inside of little glasses that light up with just a lil bit of water. And on top of that are about 3 lbs. of acrylic ice. And this too I also stained with ebony wood stain, varnished, and chrome flex molding around the sides. I'm gonna try and make another that connects the backseat and the front center console together as one piece. Feel free to ask any questions, or leave comments. Thanks!Attachments
View original BBCode
Just wanted to share my projects. The back seat tray is like the triple rear tray that vipdout makes. I don't have a table saw or good equipment so I had to make all these cuts using a jigsaw and sand by hand. Think I did a pretty good job. For this, I used 1/2 inch plywood and applied some ebony wood stain and varnish to give it the gloss. Around the sides are 1/2 inch chrome flex molding. And I was able to get the chrome holders for the bottles thanks to James Church of vipdout. The LED tray I made was a simple box design, it has LED ice cubes inside of little glasses that light up with just a lil bit of water. And on top of that are about 3 lbs. of acrylic ice. And this too I also stained with ebony wood stain, varnished, and chrome flex molding around the sides. I'm gonna try and make another that connects the backseat and the front center console together as one piece. Feel free to ask any questions, or leave comments. Thanks!