Camber on my 2nd Gen GS

I've got a 02 GS300:
20 x 8.5 +35mm offset all around lowered on DF210 springs.

Its pretty low already but I want to get some more negative camber without having to spend a load on coilovers or air so I'm thinking of cutting a coil off the springs to further lower it.

Is there anything else I can do to get more negative camber? Sorry if this is a redundant question but I've been stressing over it for a bit now ;)

Heres a pic of how it is now.

you can take it to an alignment shop and they will be able to assist you with getting negative camber.  
they may try to convince you otherwise because it will wear down your tires quicker but it can be done

Stefan, I have a dead coil cut off each of my springs and there is decent camber in the back of my car.  Rides money to.

seattle, how about pushing those wheels out.....alot?
 
then lower and camber for clearance!

[QUOTE=mrkenji;59678]you can take it to an alignment shop and they will be able to assist you with getting negative camber.  
they may try to convince you otherwise because it will wear down your tires quicker but it can be done[/QUOTE]

any suggestions on an allignment shop in particular?

[QUOTE=gato;59690]seattle, how about pushing those wheels out.....alot?
 
then lower and camber for clearance![/QUOTE]


yepp yepp. agreed.