19x9 +13 for front of 2nd generation GS ?

yay or nay ?

thanks

If you're on air and are okay with rolling and a slight pull, then no problem.

That could easily work. Just with a roll/cut and enough stretch on air will be perfect.

you will need a good shave and pull,...plus you should be on air.

anyone have pix of cars/rims  within that offset range as an example of what he's lookin for?

[QUOTE=DriftGirl;61048]anyone have pix of cars/rims  within that offset range as an example of what he's lookin for?[/QUOTE]
I posted this before, but here's one that I did for my business partner for Grip Video:
WORK Euroline KH 19X9 +20 front, 19X10 +20 rear  
[IMG]http://www.midweek.com/images/mwrides/070504/070504_30.jpg[/IMG]
[IMG]http://www.midweek.com/images/mwrides/070504/070504_12.jpg[/IMG]
I had actually recommended that he go even lower offset since later he'd be getting air.  As you can see the front was in need of spacers.

[QUOTE=DriftGirl;61048]anyone have pix of cars/rims  within that offset range as an example of what he's lookin for?[/QUOTE]

yeah any pics? im gonna run +12 in the front of my gs

thanks guys and gals.

Hey thats my exact spec on the fron of my GS.....19x9+13 225/35/19
 
it will work just fine as long as you are tucking the front.....
 
the height of it really matters....I was low....and rubbing.....so I lowered it just a tad more and the camber took care of the rest.....
 
looks sick though when your wide up front and have some camber up there:thumbsup: 
 
I rolled my fenders.

Man, and I thought my 19x9 et25 was semi aggressive....  Oh well, got the wheels for a deal that could not be passed up and Id almost rather have a slightly narrower stance for the air, because its going to sit a lot lower than airride.

im running 19 x 9 et 29 in the front. im planning on running a 10-15mm spacer in the front. its doable.