need a bit of help

i am lowering my y33 on springs but need Camber kits, control arms, etc…..to get it that right look. any suggestions?

jic makes most of the items you need.

I used the following (generic brand) items on my Y32, which should be identical to the Y33:
S14 Camber arms on the rear 
Z32 Toe Control arms (requires 2 x 1/16" spacers one one side of the rose-joint)
Just about any traction control arms can be used on the rear (any nissan RWD car from that time).
For the front the only way to add camber is to use coilovers with adjustable strut tops, or use adjustable lower control arms (specific to Y32/33 and they are BANK)

I have some almost new JIC rear camber arms for sale if you're interested

Hey Marcus, what springs are u going to use and how low? Cause im dropping my ride this weekend with some tein.

esprella and they will drop the car about 1.8-2.0". But i have to wait about 30-60 days

you can buy my tanabe's for half the price brand new and you can have em in 5 days hehe....

here is a link to what your car would look like with the tanabes....
[url]http://vipstylecars.com/forums/showthread.php?t=2508&page=2&highlight=alternative+tein[/url]