Can Fenders Be Unpulled?

This must sound like a retarded question, but I had my fenders pulled before the adjustable suspension, and now that I have it, the only way to get the real flush look I am going for is if my front fenders could somehow be "unpulled". Is this realistically (and economically) possible? Thanks! Car for reference:

[img]http://img.photobucket.com/albums/v612/kidsneedclues/In-N-Out%20Meet%206-12-07/DSC_0006.jpg[/img]

The only way?

What about spacers, or new wheels?

But no, you can't really "un-pull" them, because once metal is stretched, that's it, there's no re-compressing it into shape.

u can shrink the metal but it looks like its pulled a bit too far :( 
 
 
by a new fenders...it'll b cheaper ;)

I'd go with spacers. Seems like you still wouldn't have been completely flush even if you didn't pull the fenders.

I take it you like your wheels thats why you want to un-pull. NOW is your chance to sell them wheels and get Wider or Lower Offsets so you can get what MOST folks want BIGGER LIPS.


Spacers would give you a better look and its a  faster Fix until you figure out what you want to do.

spacers are the only answer i guess..

Thanks for the help guys. Of course I need to run spacers as well, I just would have liked to have my fenders not be so bulbous up front.

buy new fenders.

just space them wheels out

Get some wider wheels.

I say pull the rears more so they match the fronts(or even more) AND THEN get different sized wheels with lower offsets to fill them. Im not sure about the specs you have now but with more fender you could probably do a 11 or 12 incher in the rear.

Only way like listed above would be to replace front/replace rear 1/4's. I agree with the rest buy more aggressive wheels!

.

decided to just start a new thread.