yay new stance

So i got tired of being in a raked position
so i decided to lower the rear to match the front 9cm from end of skirt to the floor

and it went from this
[img]http://farm2.static.flickr.com/1220/637516883_77579ac3fe.jpg[/img]

[img]http://farm2.static.flickr.com/1068/637518563_c270bcc8db.jpg[/img]

to this
im stillllllll waiting on a transfer so i can order my airride from VIP emporium....then once installed im going to triple check my measurements and order the perfect offset wheels
and i decided not to go with the kranze, but you will all love my new idea....when you see it.

anyways, its dirty, its been raining like 4 days straight, im about to wash it

nice . .

I miss the Yokota auto hobby shop.  Just hated the damned floors...get oil anywhere and your ass will meet the floor..haha.  But that place sure is nice.

Looking good!

very nice! more pics! *droools*

ok
since you asked
suspension settled, and it brings me to this
[img]http://farm2.static.flickr.com/1247/673389600_56af02d2a4.jpg[/img]
[img]http://farm2.static.flickr.com/1321/673389314_dabde832c4.jpg[/img]
and 
[img]http://farm2.static.flickr.com/1397/694789190_b3e871c6ae.jpg[/img]

actual clearance
1/2 an inch
when it tucks when i drive, there is less than an 8th of an inch between the fender and lip as it tucks up.

purrrfecttt

Thats fat!  
 
Got any side shots taken from a bit further away? Would love to see the ground clearance & overall look...

that is ill. 
you should post those up on Zilvia?

[QUOTE=BIPPUQ45;70702]that is ill. 
you should post those up on Zilvia?[/QUOTE]
Hahaha, why so they can cry to us again about our tires and fitment?  Hahahaha...:innoutrofl2:

wow i love the tunnel shot!! damn superbly nice!

Looks good..you should bring the front down a little though. It looks a tad bit to high. Love the shots!

nice!

[quote=elpresidente;70709]Hahaha, why so they can cry to us again about our tires and fitment? Hahahaha...:innoutrofl2:[/quote]
 
 
that's exactly why, haha:giggity: 
 
god damn fanboys

front and rear are the same height to make hte car level to the ground
but i still plan on bringing the front down a tad

overall ground clarance is maybe 5-6 CM ont he skirts

[quote=Yokotas13;70680]ok
since you asked
suspension settled, and it brings me to this
[IMG]http://farm2.static.flickr.com/1247/673389600_56af02d2a4.jpg[/IMG]
[IMG]http://farm2.static.flickr.com/1321/673389314_dabde832c4.jpg[/IMG]
and 
[IMG]http://farm2.static.flickr.com/1397/694789190_b3e871c6ae.jpg[/IMG]
 
actual clearance
1/2 an inch
when it tucks when i drive, there is less than an 8th of an inch between the fender and lip as it tucks up.
 
purrrfecttt[/quote]
 
 
 
 
I love all these shots bro your cars is looking insane...

those are some high-quality pics there... mean pics and meaner car! me likey!

yeah nice shots....
 
your car is coming along great!
 
looks fat

[quote=Yokotas13;70680]ok
since you asked
suspension settled, and it brings me to this
[IMG]http://farm2.static.flickr.com/1247/673389600_56af02d2a4.jpg[/IMG]
[IMG]http://farm2.static.flickr.com/1321/673389314_dabde832c4.jpg[/IMG]
and 
[IMG]http://farm2.static.flickr.com/1397/694789190_b3e871c6ae.jpg[/IMG]

actual clearance
1/2 an inch
when it tucks when i drive, there is less than an 8th of an inch between the fender and lip as it tucks up.

purrrfecttt[/quote]

WOW. on the real :eek2: WOW. Looks sweet. Keep up the good work and that fitment looks smooth. Nice work

fitment will be better
i decide on a 18x10 -3 sizing in the rear
still not sure on the front
ILl add a full rear link setup and add some camber so i can tuck higher than i am without stoppin gon my tire on teh wheel well lol
got stuck twice on entrances

and sorry, i mismeasured the clearance, its actuall 2 CM from lip of fender to wheel

Still great fitment. what wheels are you planning on?

Sweet Cedric. I like it even without the tint.

[quote=BIPPUQ45;70884]Still great fitment. what wheels are you planning on?[/quote]
Kranze LXZ
WOrk varienza D3S
Work euroline SL
Lock Smice (or however you spell it) Dukes.

not sure

[quote=Yokotas13;70889]Kranze LXZ
WOrk varienza D3S
Work euroline SL
Lock Smice (or however you spell it) Dukes.
 
not sure[/quote]I say Varianza D3S, one of my favs right now. Your car is looking awesome.

hmmm the kranze LXZ would look dope.

thats hte problem, in the offsets im using, ive never seen the Varianzas used, 
but the kranzes will have goooobs of personality i think

Oh yeah, i bought an exaust yesterday
pics when installedq

ill, what exhaust?
Kranze are the hardest wheels ever for your car. they would look dope as hell.

not tellin until i put it on