new ucf1x

well i have been looking for a lil bit now and i finally found one optioned how i like and picked it up for a good price. here are some pics of when she got home. new wheels are on the way:dance: (my 20's looked ghetto)
 
 
 
 
 
 
 
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0726cameron0068.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0726cameron0066.jpg[/IMG]

Looks clean.  What wheels did you pick up?

yeah, not the color i wanted but its different. i picked up a set of Work 18's with +0 offsets

well thsi sucks, come to find out one of the previous owners removed the air ride and put normal spring and struts. looks like im on the lookout for aftermarket air ride. this sucks b/c i was planning on an air ride controller to slam it.  :pat:

you got work to do to get those +0 offsets to work for you.

yeah i know, they should be in sometime this week but i start 14 hour shifts today so i probably wont be able to work on it for a couple weeks. ill keep you guys posted. (fronts are 8j and rear 9j)

[QUOTE=RotaryAE86;77060](fronts are 8j and rear 9j)[/QUOTE]
Well at those widths, it should work without too much hassle.  Had they been much wider then yah.  Just be ready to work those fenders.

[quote={-.-};77003]you got work to do to get those +0 offsets to work for you.[/quote]
 
 
0mm... nooooiiiicccceeee :) sorry i missed your msn, log on again onegai....

yeah, i expect to do a lil bit of massaging

i wont show any pics until im done 
 
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0084.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0083.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0082.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0081.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0078.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0077.jpg[/IMG]
[IMG]http://i2.photobucket.com/albums/y27/RotaryAE86/2007_0801zookaitlyn0076.jpg[/IMG]

I say dont even use em..they look too small and are gonna poke out way too much IMO...

theyll tuck in more when the suspension isnt hanging and i can "massage" the fenders to make em work pretty easily. they also look small b/c no tires and theyre hanging. i dont know when ill have pics of them on and the car slammed on them (extra time is kinda hard to come by) but it'll look good i promise:biggthumpup:

IMO,8/9's are a little small for an LS.but we'll see how it looks with some tires and slammed.

i think the fitment will be fine becuase of the offset...event hough they are narrower than commonly used.
he's basically an inch narrower than my wheels but my offset is +24 which is almost an inch, compared to his +0, so they should fit very close to the fender.

u should' have  gone with a higher offset, something like +20-30.

now you have to do all this crazy sh*t to it. And that dark gray, yuke.

[quote=QoozyFoozy;79314]u should' have gone with a higher offset, something like +20-30.
 
now you have to do all this crazy sh*t to it. And that dark gray, yuke.[/quote]
 
 
 
thanks for the positive comment there, its actually "taupe" (aka brown)
 
and if the wheels arent aggresive then whats the point?? +20-30 is for pussies 
 
im what they call a wheel *****, i have 9 extra sets sitting in the garage ranging from 13"-20" (except 19's) so i know a lil bit about fitment