Will these fit on a Y33 Q45?

Okay guys I have found a set of Amistad Dish wheels
The specs are:
Amistad Dish wheels *Only 2 sets in the states and this is one of them, rare Japanese wheels*  
19x10 front -15 offset  
19x11 rear -20 offset  

Is there anyway to fit these on a Y33 without pulling and SUPER mad camber, i'm fine with like -4.0 but nothing insane.

you are going to have to do some work to make these fit. A member on the forum Pagong had similar offset Amistad Dish wheels and he needs major fender work to make them fit (which he hasn't done). He is selling the car now but you can get an idea of the mods you will have to do to make these things work. [url]http://www.vipstylecars.com/forums/showthread.php?t=6110[/url]

Jake

oh so the short answer is nope.... you gotta pay to play with these wheels.

LOL those are my wheels..welcome by the way.
 
I have pictures of the wheels on a 1997 Q45 thats on air on full down.  From the fender to the edge of the lip it sticks out 50mm.
 
If you are in Seattle I can show you my car and how the wheels sit.  
 
PM me and I wil give you my phone number.
 
Vince

[QUOTE=Pagong;88915]LOL those are my wheels..welcome by the way.
 
I have pictures of the wheels on a 1997 Q45 thats on air on full down.  From the fender to the edge of the lip it sticks out 50mm.
 
If you are in Seattle I can show you my car and how the wheels sit.  
 
PM me and I wil give you my phone number.
 
Vince[/QUOTE]

Are your wheels really -10/-10? because they stick alot farther then -10....

[quote=DaygoVIP619;88951]Are your wheels really -10/-10? because they stick alot farther then -10....[/quote]
 
When I sent him the email I mentioned -10 for the front *approx.* and -20 for the rear *approx*.
 
In my picture thread someone mentioned that the -10 sticks out exactly 21mm more compared to a +11 offset.  So from there I just gave a ballpark figure.