helped a friend out today with some mounting...

im not going to say what the sizes are, or offsets until/unless he chimes in.... but i will say its going to look SICK on his ucf21....
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0241.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0242.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0243.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0247.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0248.jpg[/IMG]

wow you are such a tease

Nice stretch.  I agree, they should look real good on an UCF21

are those evan's?

looks like a good stretch to me...federal tires?

Looks like Dans/Aaron's old wheels:
[IMG]http://www.vipemporium.com/vsc/aaron1.jpg[/IMG]

Always love these wheels, very timeless.

[quote=VIP-UCF;96203]are those evan's?[/quote]
those are the ones...

[quote=Big Steve;96212]looks like a good stretch to me...federal tires?[/quote]
federals they are...

[quote=elpresidente;96213]Looks like Dans/Aaron's old wheels:
[IMG]http://www.vipemporium.com/vsc/aaron1.jpg[/IMG]

Always love these wheels, very timeless.[/quote]
yes, i love these rims too, just like dan/aarons but way different specs....

[quote=elpresidente;96213]
[IMG]http://www.vipemporium.com/vsc/aaron1.jpg[/IMG]
 
[/quote]
 
To who ever took the pic- good job capturing the diamond cut polished finish

I love these wheels :biggthumpup: I thought I recognized them....

Diamond cut = good!

I have a 375/20-21 here at the office on a 21x14" that was challenging to mount... 
for different reasons! (yes, that was TWENTY series)

^375/20-21?! what the hell can you mount that on? I thought mass-produced tires didn't come bigger than a 355 width though...Please, post pics.

quit teasing man...

hey mista808...u mount tires?  how much u charge?

[QUOTE=elpresidente;96213]Looks like Dans/Aaron's old wheels:
[IMG]http://www.vipemporium.com/vsc/aaron1.jpg[/IMG]

Always love these wheels, very timeless.[/QUOTE]

tsuraichi FTMFW!!

[QUOTE=NYC03Alti;96314]^375/20-21?! what the hell can you mount that on? I thought mass-produced tires didn't come bigger than a 355 width though...Please, post pics.[/QUOTE]

Kumho is developing this tire for the rear of Viper, Ferrari 599 and 612 (they hadn't thought of the Ferrari until I mentioned it!). Unfortunately, it's not quite the right diameter for the rear of the Veyron... had to do 20s front & rear on that one.

Sorry to jack the thread!

The specs aren't that different that dans old rims...sorry brandicus...I got another set coming for you...

sup raymond thank you for helping evan with mounting his tires. you are da man!

[quote=SoCalSC4;96335]Kumho is developing this tire for the rear of Viper, Ferrari 599 and 612 (they hadn't thought of the Ferrari until I mentioned it!). Unfortunately, it's not quite the right diameter for the rear of the Veyron... had to do 20s front & rear on that one.
 
Sorry to jack the thread![/quote]
 
 
I bet those tires cost more then a set of rims.  Thanks for posting, I was curious when you mentioned those sizes as well.

i have a slight feeling that the tires are going to be coming off soon

my friends plans change so sudden.... but heres more teasing.... hope he doesnt mind....
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0238.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0234.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0240.jpg[/IMG]
[IMG]http://i22.photobucket.com/albums/b335/calitri808/VIP/HPIM0239.jpg[/IMG]

nICE PULL

$20 each rim....mount & balance
[quote=beangrower;96325]hey mista808...u mount tires?  how much u charge?[/quote]

damn thats cheap.

One shop here charges over 150 for 19" mount and balance.

What are the widths on the wheels and the specs on the tires for reference?

[quote=AME_VIP;97290]damn thats cheap.
 
One shop here charges over 150 for 19" mount and balance.
 
What are the widths on the wheels and the specs on the tires for reference?[/quote]
 
wow thats too much !, find a shop who deals with thos DAYTONS and they know how to do stretch tires :smiley-rofl: :runcoold:

well, since he sold them i dont think he'll mind. they were 19x10, 19x11 225/35/19 front, 245/35/19 rear... 

yeah i charge about $80 for stretched tires. i do daytons too for the low lows, not hard at all. sometimes it depends of the design of the rim. i did some 19x11, 245/35/19's for REV-01 and i wasnt able to stretch it. but id did these same rim spec and tires and i was able to do it. wierd... but i got it down now.

it's all in the lube...

[QUOTE=mista808;97419]well, since he sold them i dont think he'll mind. they were 19x10, 19x11 225/35/19 front, 245/35/19 rear... 

yeah i charge about $80 for stretched tires. i do daytons too for the low lows, not hard at all. sometimes it depends of the design of the rim. i did some 19x11, 245/35/19's for REV-01 and i wasnt able to stretch it. but id did these same rim spec and tires and i was able to do it. wierd... but i got it down now.[/QUOTE]


so u are able to mount 245 on an 11"?  jus wondering.

i can put a 235 on an 11

did it like 2 weeks ago
the secret is using FEDERALS

[quote=beangrower;97426]so u are able to mount 245 on an 11"?  jus wondering.[/quote]

yes sir....

[quote=Yokotas13;97432]i can put a 235 on an 11

did it like 2 weeks ago
the secret is using FEDERALS[/quote]

for real, gotta love the federals... even easier/better when using brand spanking new tires...

thanks for the details

[quote=mista808;97549]yes sir....



for real, gotta love the federals... even easier/better when using brand spanking new tires...[/quote]
yeah 225/40 on a 10j with no help

put it on, inflated, and on it went

strap and cheater, also helps if the tires are warm

ive never had to use either, and ive done some crazy stretches

having the right tire mounting machine helps too...
 
let me guess yokota, you used the shitiest one...haha

no clue
ive only used one tire machine in my life, but ive changed like at least 100 tires on it in teh last year

i only use the machine to put the tire on the wheel anyways, after its on, i take it off the machine to inflate

The tires in the first pic.. isnt it the General exclaim UHPs?? i have them on my 19s. they have the same exact tread pattern. i love them. they are a awsome tire. but man i did not know you could stretch them that far. I dunno about the lip of the wheel being exposed like that. isnt that kind of unsafe?? I mean one pot hole and the tire and wheel are history. im suprised you can pass safety with that type of set up. but looks very aggresive though. nice work!! too bad it didn't work out for him.  thats how 808 does it!!! lol

hah, safe....you maek me laugh young one!!^^

[quote=Yokotas13;99363]hah, safe....you maek me laugh young one!!^^[/quote]
 
 
ahaha yea...well i can do a 225/40 all day on a 10in.....im sure a 215/35 could be also..shoot its giving me some ideas now.:shrug:

[quote=kuni808;99320]The tires in the first pic.. isnt it the General exclaim UHPs?? i have them on my 19s. they have the same exact tread pattern. i love them. they are a awsome tire. but man i did not know you could stretch them that far. I dunno about the lip of the wheel being exposed like that. isnt that kind of unsafe?? I mean one pot hole and the tire and wheel are history. im suprised you can pass safety with that type of set up. but looks very aggresive though. nice work!! too bad it didn't work out for him. thats how 808 does it!!! lol[/quote]
 
 
i dunno about passing safety?? hahha but ya im thinking of running the same size tires evan had on the wheels. 
 
 
raymond, i might be contacting you about mounting. i dunno if my other friend is as capable... but ya ill let u know...
 
thanks