Faces for Work Euroline...

Hey I was wondering does anyone know if you can just buy the DH face instead of the whole wheel. I have some's DH's and planned to have them painted at first but thought if I can just buy the faces I could swap out whenever I got tired of the look.

might be kinda of hard to do cause the eurolines are 2 piece welded.

well the dh i owned were two piece weld...so yea they were two piece...the rivets were not real and the back of the face was welded on the barrell...iono if they make any others.

Yea, could someone confirm this? I was told by a vendor that you could just get the face changed. My 2nd pair of DH's I'm not sure if the back of the face is welded, but the rivets can be loosened, well at least I know that because when I 1st got them, I had to tighten 2 of the nuts down on 2 rivets, but I've never tried loosening all the rivets to find out myself.

On my DHs, the bolts are cosmetic, and the face is welded to the barrel.

[quote=Benji;99545]Yea, could someone confirm this? I was told by a vendor that you could just get the face changed. My 2nd pair of DH's I'm not sure if the back of the face is welded, but the rivets can be loosened, well at least I know that because when I 1st got them, I had to tighten 2 of the nuts down on 2 rivets, but I've never tried loosening all the rivets to find out myself.[/quote]

Even when you can change the face, most the time if they have been driven on a little, the wheel flexes and changes a little, making it almost impossible to switch faces because not everything lines up.  Then you get into a mess of work to make them fit proper without bending them etc....

Yea it's confirmed, they're welded together i just received an email from WorkUSA... =( Thanks all

Most of the 2piece wheels from Work are welded together so it would be pointless. But all of their 3 piece wheels should be able to come apart