Thread #7357

camber on UCF21

9 archived posts · 1,152 historical views

TriggaOctober 22, 2007
#99986

camber on UCF21

on a UCF21 with the factory air suspension, are there aftermarket camber arms that can be used or can you only achieve camber with the height control?

otherwise coilovers are the only option?
View original BBCode
on a UCF21 with the factory air suspension, are there aftermarket camber arms that can be used or can you only achieve camber with the height control?

otherwise coilovers are the only option?
0x21October 22, 2007
#100016
i believe the factory arms allow camber adjustment as well. it's not a whole lot but usually enough unless you're running really aggressive wheel set up.
View original BBCode
i believe the factory arms allow camber adjustment as well. it's not a whole lot but usually enough unless you're running really aggressive wheel set up.
nizzan4u2nvOctober 22, 2007
#100020
I was only able to get -2.5 front and almost -4 rear with maxed out stock adjustment. I want to be closer to -3.5 - -4 front and -5 rear for a more hardcore look.
View original BBCode
I was only able to get -2.5 front and almost -4 rear with maxed out stock adjustment. I want to be closer to -3.5 - -4 front and -5 rear for a more hardcore look.
DominikOctober 22, 2007
#100081
Holy crap they are expensive! Sometimes its good to have a Nissan :)
View original BBCode
Holy crap they are expensive! Sometimes its good to have a Nissan :)
nizzan4u2nvOctober 22, 2007
#100122
Dominik;100081 wrote:Holy crap they are expensive! Sometimes its good to have a Nissan :)


Sometimes I kinda wish I had gotten a y33. My LS is actually my first non nissan.
View original BBCode
[quote=Dominik;100081]Holy crap they are expensive! Sometimes its good to have a Nissan :)[/quote]

Sometimes I kinda wish I had gotten a y33. My LS is actually my first non nissan.
TriggaOctober 23, 2007
#100261
sweet as. hoping that the air suspension can handle enough camber for minimized guard rub
View original BBCode
sweet as. hoping that the air suspension can handle enough camber for minimized guard rub
smallwonder809March 3, 2010
#304032
I achieved -6 to 7 on stock arms on coilovers. You can do it! A friend of mine had -6 on factory air.
View original BBCode
I achieved -6 to 7 on stock arms on coilovers. You can do it!  A friend of mine had -6 on factory air.