Test fitted the Ordens on the F50

I bought these from YokotaS13 about a month ago and have been sitting in my garage.  I'm still debating if I should use this size or go 20" instead.   If not they'll be up for sale on here soon.  Located in SoCal.  Trying to figure out what size tire to get.  I'll most likely pick up a set of Falken 452s.  A month ago a tried on the rear with the rear spring taken out.   Checked to see how much I'll have to roll/pull.   You tell me what you think...here are the pics.  (rear only)

Leon Hardiritt Orden
19x9 -5
19x10 -6

[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45a.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45b.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45c.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45d.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45e.jpg[/img]

[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45f.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45g.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45h.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45i.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45j.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45k.jpg[/img]

[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45l.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45m.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45n.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45o.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45p.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45q.jpg[/img]

[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45r.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/ordensQ45s.jpg[/img]

yeah...i know...the rims are dirty and need of a good minor polish and wax...This is how I got them from YokotaS13 which he used for a few months I believe...

Update 5/27:  Test fitted the rims with tires.  Lowered the suspension alittle more but guess it wasn't enough.    Anyways maybe next time I'll go lower but on my stock wheels had less gap so i thought it was right.     Should I lose the mudflaps?   they're starting to scrape on speed bumps.   

Here is a link to the fronts I test fitted last week.
[url]http://www.vipstylecars.com/forums/showthread.php?t=11034[/url]

[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment001.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment002.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment003.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment004.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment005.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment006.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment007.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment008.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment009.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment010.jpg[/IMG]
[

Yo! You got to make these fit!

These r stunning on your car!
makes me want to go pick up a f50 & buy these from you! :runcoold:

really really nice! will look better on this car . i am interested to see how u wil make it fit!
keep it updated!

[QUOTE=volkgt7;119277]really really nice! will look better on this car . i am interested to see how u wil make it fit!
keep it updated![/QUOTE]

with a hammer

Damn that F50 is gon look ill once you get everything worked out. I really wanna pick one of those up.

slight pull and those should fit real nice

Yah, they're very close to fitting already.

Your going to want a pretty small size if you want FK452.  Probably 225/235.

Those look great on your car. Perfect fit. I say you mod the fenders and keep them.

[QUOTE=TristateViP;119292]slight pull and those should fit real nice[/QUOTE]

I sure hope so...when time comes I'll consider autofashion to do the pull/roll/cut or if they can point me in the right direction.    Fenders will need work too but yet have tried to fit those.

[QUOTE=AME_VIP;119306]Your going to want a pretty small size if you want FK452.  Probably 225/235.[/QUOTE]  

for the rears?????  isn't that a bit too much?   I kinda want to go as beefy as possible but not over beefy.   I'm not the type to get the smallest tire I can rather the largest while looking proportional.

[QUOTE=elpresidente;119305]Yah, they're very close to fitting already.[/QUOTE]

That's what I said...I was expecting worse.   Now the question is how bad is the fronts.  After talking with WidebodyQ he says the fronts are easy and I believe him with his super sub zero offset and high widths.

Keep the wheels.....does not look that bad at all.......should not be that much work to fit......225/235 should do the trick on the rubber.........or even going a 225 on the 10's would help with more clearance issues.

Those Ordens looks sweet!

Sukoshiyoshi

Love the way it looks.  Cant wait to see it with tires and at that height.  The front will slightly poke though because the camber cant be adjusted up front.  Will look sick reguardless

Looks incredible! Please don't sell those! Ordens are by far my favorite wheel of all time...one day I'll order a custom set for my car...one day.

Damn that's tight!

From the looks of it, aren't some cambering and you're good to go? I mean, it's just a slight poke... Otherwise, a mild pull and you're set!

:cool2: dammmmmmmmmn, keep those.
Wow, ordens on a F50 is fuckin ill.
You gotta make it work, DO WORK BABY.
I really like the black/silver combo.

hell yeah man i agree with everyone the ordens are absolutely beautiful on the f50. hope all goes well and post up picks once they fitted.

thats fucking hot wish i could find a set in australia

awsome.... i must have 1 set .... That is no 1 wheels on jan 2008 vip style magazine...

if you knew how much they marked up ordens this year, yuou wouldnt say that

!8s, are now the price of 19s.
thats 2500.00 for 18s.....rediculous

[quote=Yokotas13;119449]if you knew how much they marked up ordens this year, yuou wouldnt say that
 
!8s, are now the price of 19s.
thats 2500.00 for 18s.....rediculous[/quote]
 
ARE YOU SERIOUS! :pat:

[QUOTE=Yokotas13;119449]if you knew how much they marked up ordens this year, yuou wouldnt say that

!8s, are now the price of 19s.
thats 2500.00 for 18s.....rediculous[/QUOTE]


Yikes!

KEEEEEEEP em'

not a big fan of f50's but seems like urs is going to be a sick one.

Nice fit, the setup looks great

I have 235 and 245 /35/19 if you want tires.  They're almost brand new just 99% used.  Only selling them for $500. email me [email]calvinsworld@gmail.com[/email] if you would like more information.

LOLOL
i can get new federalsw shipped from the US to japan for less than that!

[QUOTE=Kuroikaze;119502]Yikes![/QUOTE]
He's not kidding.  I was there with him to witness the shock first hand as I ordered my 19" Waffe's.

cool...good investment then?

yeah, now, those are almost 3200.00 in 19s....
you robbed me

hahaha!  internationaly!   buy low..sell high.   Haven't these rims been out for some years now?   Reason I think this is because the website has like an new/annoucement section and these rims are way down the list.

It was in one of the VIPmags a few months ago!
 
You definatly got a steal w/ these!!!!!!!!!
 
Alot of people don't have them because alot of folks won't spend over 4K for some rims!
 
AND I've never seen a F50 w/ Ordens wspecially Black and w/ aggressive fitment like yours would be! Until you get air this should be the greatest time in your F50 BUILD!!!!
 
LUCKEY!!!

Do I even need to say it?

Dooo eeet!!

That shit is unheard of here... it must be done! Looks awesome, and all we saw was a rear wheel on a jack.

yeah, the Ordens are the #1 wheel of 08 or something, not too sure. thats part of the reason i wanted to get rid of them, i saw more and more cars with them, and i wanted a more exclusive wheel.
 
but i digress, htey look slammin, and they should fit fanfuckigntastic

Blitz, everything looks pretty good. If you are in the market for some RUCA's on that bad boy, let me know. My custom set just got finished for the 350z and it def does everything I need it to do ;)

[img]http://www.motortuned.com/350z-ruca/01.jpg[/img]
[img]http://www.motortuned.com/350z-ruca/02.jpg[/img]
[img]http://www.motortuned.com/350z-ruca/06.jpg[/img]
[img]http://www.motortuned.com/350z-ruca/13.jpg[/img]

holy sh!t!!!!   I was wondering if someone made these....however I'm not sure if these would work on a F50 since you said it's for a 350Z.   Here are some pics of the rear suspension I took when I was test fitting the rims.  These pics are of the left rear suspension.   The one you have pictured looks like it would be for the right rear which I'm trying to picture the opposite.   How much are these anyways?

[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension1.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension2.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension3.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension4.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension5.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension6.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension7.jpg[/img]

[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension8.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension9.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension10.jpg[/img]
[img]http://tony.chubby-bunny.net/Orden&suspension/LoRes/Q45rearsuspension11.jpg[/img]

[quote][img]http://www.motortuned.com/350z-ruca/01.jpg[/img]
[img]http://www.motortuned.com/350z-ruca/02.jpg[/img]
[/quote]

Are the two holes in the middle of it all for the link to the sway bar?

Agreed, I did take a look at the suspension on the F50 and it probably wont bolt up like you said but I am offering you my custom services to develop a product like I posted pictures of above. PM me if you are interested.

P.S. Yes, the holes in the middle are for the sway bar link to mount up.

[quote=UrbanTacticz;121946]Agreed, I did take a look at the suspension on the F50 and it probably wont bolt up like you said but I am offering you my custom services to develop a product like I posted pictures of above. PM me if you are interested.
 
P.S. Yes, the holes in the middle are for the sway bar link to mount up.[/quote]
 
PM sent.

PM sent.

maybe we can do a group buy on these...since we have a few F50s now....WidebodyQ get in on this also.

Sure, a group buy is actually suggested because it will help you guys big time in terms of pricing. As soon as either Mikey or Tony can help me with some rough measurements, Van and I can begin coming up with some numbers for you guys based on quantity. I will be in touch with all you who have PM'ed me.

Thank you!

[QUOTE]WidebodyQ get in on this also.[/QUOTE]
 
 
 
Im on a custom setup, I already have all the camber I need front and back.

Im down for a custom setup as well!!

[quote=sx_drifter;125656]Im down for a custom setup as well!![/quote]
Which car do you have? Make model year please!

F50 for the group buy!!!

ohhh...thats 3 people now....well lets see how much these would cost in the first place...also are these safe?  I don't want it to come lose or break.   I have to ask because that would be alot of money down the drain...and the insurance guys would probably void my claim once they know I modded the arms and that was the cause.

wheels look super sexy! no need for 20's!

[quote=Blitz;125703]ohhh...thats 3 people now....well lets see how much these would cost in the first place...also are these safe?  I don't want it to come lose or break.   I have to ask because that would be alot of money down the drain...and the insurance guys would probably void my claim once they know I modded the arms and that was the cause.[/quote]
How's my car for safe? Daily driven with -9.5 degrees camber! The parts on the arm are made with real OEM parts. Bushings are of OEM quality and is used an another OEM application and the bushings are spherical bushings that are pulled off a production car thats on the streets. The arm itself is built to be overkill--it's really beefy. And the bushing housings that connect to the main arm itself is held in place with a friction fit and them clamped to the main arm with grade 12 fittings.

My car is proof that these things are 100% safe :biggthumpup:

let's do a F50 cima GB for sho'!!!

[QUOTE=UrbanTacticz;125764]How's my car for safe? Daily driven with -9.5 degrees camber! The parts on the arm are made with real OEM parts. Bushings are of OEM quality and is used an another OEM application and the bushings are spherical bushings that are pulled off a production car thats on the streets. The arm itself is built to be overkill--it's really beefy. And the bushing housings that connect to the main arm itself is held in place with a friction fit and them clamped to the main arm with grade 12 fittings.

My car is proof that these things are 100% safe :biggthumpup:[/QUOTE]

thats wsup! Pics?

[quote=volkgt7;125836]thats wsup! Pics?[/quote]
Give me a little bit and let me create a new thread because we are seriously hijacking this poor guy's thread :pat:

yeah...this is my thread...seats taken!  ....cool UrbanTacticz...thats exactly what I wanted to hear...yeah it looks like it can take the abuse.   Good to know quality parts are used.

Gentlemen, here is the new thread for the custom rear upper control arms (RUCA's):

[url]http://www.vipstylecars.com/forums/showthread.php?t=9130[/url]

Hey Blitz .. Can you Shine them up for the next owner ? 

 they look great I just need to have to make a final sale of the Miata tonight .. I Believe ...  and these are looking good to me . or a Brand new set of wheels ... 

I'd love to see more pictures too .. 


I wish SickassSpanky could chim in ... Hmm how the Gs will look with some Crazy offsets on them haha The amount of work to make fit ;)

and cant hurt to ask ... and price bump to help push these ?

thanks James

noob question (sorry still learing about offset's) but can yall tell me about these -7 and +7 numbers? (example: 19x10 -7 offset) does the - mean that the wheel will stick out more or?

deeezam! those are going to look sick!!!!

[quote=BrOKeN AbStRaCt;144001]noob question (sorry still learing about offset's) but can yall tell me about these -7 and +7 numbers? (example: 19x10 -7 offset) does the - mean that the wheel will stick out more or?[/quote]

:innoutrofl2: the - mean is sticking out way far ... stock gs wheels are like +50 then gotta go down to 0.. so be a -7 thats a Neg offset = huge lip  (which I believe each .5 inch = 12 millameters).

thanks bippu!

Some more pics near the first few posts.

[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment011.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment012.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment013.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment014.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment015.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/Orden/OrdenRearFirment016.jpg[/IMG]

hi blitz, what size tires are u running up front and behind? sick rims man....

19x9 225/35 FK452
19x10 245/35? Pirelli Somethings

shoot I'm not 100% sure now..I keep forgetting.

sounds correct ..

[quote=Blitz;159731]19x9 225/35 FK452
19x10 245/35? Pirelli Somethings
 
shoot I'm not 100% sure now..I keep forgetting.[/quote]
 
thanks bro!

Looks like Pirelli P7000?   They run really wide!  Honestly switch to 225/35/19 and 245/35/19 Falken ST115 and you should be able to go lower.

I'm not even rolling on these yet until I figure out the fender rolling pulling situation.  Then I'll lower even more and slap on the rims...this was just a test fitment.

always loved those wheels
 
looks nice

[QUOTE=Blitz;159731]19x9 225/35 FK452
19x10 245/35? Pirelli Somethings

shoot I'm not 100% sure now..I keep forgetting.[/QUOTE]

Dude i never really understood the Hype about Ordens until i saw this thread. Those wheels are CRAZY nice! Did you sell them already? I remember you wanting to sell them a while back...

You should keep'em and make'em fit!



They're Pirelli Asimmetrico out back...

Those are my all time Favorite tires!:runcoold: They're not good for much else but dry performance. They're some of the best tires Pirelli made :giggity:

They discontinued them like 2 or 3 years ago. If you pay attention to InitialD in the second Season, they had Ryosuke Takahashi's FC on Pirelli Asimmetrico tires...

i think they look damm good !!! all you need is just to roll fenders like you said and that it , i am going to use about the same tire setup as you but in 20 inch.