Bold World Install Pics

the guys that did the install dan and brandon are putting together a shop called garage floor customs.  My bold world kit was the second bold world kit they have installed!  They put a mode parfume cup system on a GS.  Here are the pics of my car they took. 


this is the front 

[img]http://crucialmindz.com/gfc/q45/03.jpg[/img]

front camber plates 

[img]http://crucialmindz.com/gfc/q45/04.jpg[/img] 


the rear section you can see where they needed to trim for the bags 

[img]http://crucialmindz.com/gfc/q45/07.jpg[/img]

the trunk setup, the compressor etc are neatly done in the spare tire well 

[img]http://crucialmindz.com/gfc/q45/09.jpg[/img]

coo beans....you gonna show at Import Reactor dave?

the digital controller was molded into where the tape deck was, it looks better in person, i will take a better pic too much flash. whats cool as the tape deck had the brain for the bose stereo dan was able to fit that behind the controller using the stock mounting points. 

[img]http://crucialmindz.com/gfc/q45/010.jpg[/img]

Interesting setup!

What kind of compressors is bold world using? 

Do you have a picture of the actual compressor mounting? 

What kind of valves are in the kit? 

Does the compressor make your car vibrate? 

How loud are the compressors from the outside of the car?

Yeah...I'm curious hah

[QUOTE=RaCinStylez;117619]coo beans....you gonna show at Import Reactor dave?[/QUOTE]

when is it if my wheels are on then i will. but im trying to get the fitment perfect and its taking some time. 

D.

drop from the side 

[img]http://crucialmindz.com/gfc/q45/012.jpg[/img] 


[img]http://crucialmindz.com/gfc/q45/013.jpg[/img]

[quote=dvp;117624]when is it if my wheels are on then i will. but im trying to get the fitment perfect and its taking some time. 
 
D.[/quote]
 
 
its March 21st.  Maybe if you are done you can show with me and mr.executive

from the front 

[img]http://crucialmindz.com/gfc/q45/011.jpg[/img] 


but as always these pics dont do it justice 
when my wheels are on i will try to get better pics for everyone 

D.

[QUOTE=RaCinStylez;117628]its March 21st.  Maybe if you are done you can show with me and mr.executive[/QUOTE]

thats cool, i should have my wheels on sometime in feb, so thats great.  I would love to show with you guys. 


D.

[QUOTE=UrbanTacticz;117621]Interesting setup!

What kind of compressors is bold world using? 

Do you have a picture of the actual compressor mounting? 

What kind of valves are in the kit? 

Does the compressor make your car vibrate? 

How loud are the compressors from the outside of the car?

Yeah...I'm curious hah[/QUOTE]

they use either viar or thomas, the base kit comes with one thomas.  Its not that loud, but you can hear it outside and inside the car. its like a  hummmm sound.  However it doesnt vibrate the inside of the car at all.  No i dont have pics of the compressor mounting.  Bold World uses an air box which is interesting so all the valving etc is hidden in the box.  The digital controller also has a stand alone brain which uses a complex system to measure psi and ride height. if you check my other pic thread i have pics of everything pre install. 

D.

[quote=dvp;117631]thats cool, i should have my wheels on sometime in feb, so thats great. I would love to show with you guys. 
 
 
D.[/quote]
 
 
sweet man.  When you get your wheels let me know.  Maybe if ud like you can join our crew too.  We are going to go to a lot of shows local and out of state, trying to get the most possible media exposure we can.  lmk

Damn, looking sweeeeet!

That strut looks so similar to the Y33 setup... Must have been a good design if Nissan are still using it :)

so what does it ride like?

I am very happy with the ride quality, it is only a slight downgrade on stock quality.  The lower you go the better it gets.  It handles pot holes and bumps nearly as well as the stock set up, but it is less forgiving. It transmits bumps through the cabin, much more than stock, so it is a little more harsh.  However it passes the female driver / occupant test, and thats all that matters. I would like to ride in a car with air runner or UAS for comparison purposes, that would be interesting. 

D.

+1 for another F50 owner!!!

Ive been waiting for this for a while.  Looks good, im happy for u

[QUOTE=widebody_Q;117832]Ive been waiting for this for a while.  Looks good, im happy for u[/QUOTE]

thanks man, how is your ride coming? Also I hope to have fitment nearly as extreme as yours in a couple years.  The wheels im putting on the ride right now are mild in comparison to yours. 

D.

Ive made a few changes here and there to my ride. Right now, im concentrating on underbody mods. No need to rush anything since im building the car for myself. Im concentrating on clearance that way I can save money down the line on future repairs that I would have to make like o2 sensors, oil pans, etc.
 
Im glad you got this done, I was begining to think you got rid of the system or the car. Cant wait to see which wheels you choose.

nice to know that you love the bold world kit man. its a very nice kit.

can't wait to see the car done...another nice tx vip car!

[QUOTE=widebody_Q;118063]Ive made a few changes here and there to my ride. Right now, im concentrating on underbody mods. No need to rush anything since im building the car for myself. Im concentrating on clearance that way I can save money down the line on future repairs that I would have to make like o2 sensors, oil pans, etc.
 
Im glad you got this done, I was begining to think you got rid of the system or the car. Cant wait to see which wheels you choose.[/QUOTE]

no way i love my car! I just am super busy at work and life, so my car takes a back seat sometimes.  Plus i am really carefull about who works on my car.  So it  takes along time for me to get parts from my floor and onto the car.  I think garage magical has skid plates for our cars to protect vital parts while driving looooow. 

D.

What kind of wheels are you going to run? Install looks clean.:biggthumpup:

right now im going to run some carlsson 2/6ths, in the future something a little more hardcore. But it should look clean.  


D.

[QUOTE=dvp;118413]right now im going to run some carlsson 2/6ths, in the future something a little more hardcore. But it should look clean.  


D.[/QUOTE]


What type of offsets? Would look pretty clean! :biggthumpup:

got any better pictures of the rear?   Is the bag and strut all in one?   Reason I ask is because the rear the spring and shock are seperate from each other.   Does this setup eliminate the use of the spring and just use a bag over strut?

i will try to get a better picture, but there is no spring.  the bags sit on a plate that fits in the area they had to trim. in the picture you see the strut just hanging there, under it is where the bag assembly bolts on. 

D.

[QUOTE=Kuroikaze;118848]What type of offsets? Would look pretty clean! :biggthumpup:[/QUOTE]

they are 20 by 9.5 +35 i am going to mega space them for a flush fit, thats whats taking so long as i want it to get it perfect. 

D.