I need VIP wheel 20 Inch !!

what is available outhere? tricky part is this car bolt pattern is 5x120!!
here is my car. anyone have 20 inch wheel in this bolt pattern pm me.
otherwise please point me to the right direction.

Thanks a bunch guys!

[img]http://www.smugmug.com/photos/224295927_qRpzH-M.jpg[/img]

I take it you have not researched your van and its wheel applications on many japanese sites?
 
Carlife- Parts Section -Wheels for Honda Odyssey
[URL]http://minkara.carview.co.jp/parts/unit.aspx?mo=174&ci=3[/URL]

actually I do, but since my weird USA ody bolt pattern is 5x120 offset 45 , not 5x114.3 like JDM odyssey,  nothing I can do much with my van wheel.

rather than lead you on to a foreign site in japanese :pat:  , I'll lend u a hand.

first of all, are u sure your bolt patternis 5x120 ? If you are sure, then look for wheels made for BMW. Your center bore of 64.1 should not be a problem either.

ebay has many wheels specific for BMW, I believe MRR also makes 5x120. have u checked out the mrr hr6 ? pretty sick imo.

[quote=epi79;139755]actually I do, but since my weird USA ody bolt pattern is 5x120 offset 45 , not 5x114.3 like JDM odyssey,  nothing I can do much with my van wheel.[/quote]

I've been wanting an ODY for a while.. I love the new ones.

I love Odysseys... just picked up an '08 EX-L for work.

I looked at some Vossen VVS-082s for it, 20x9 +35 for all four corners.
I know guys on Odyclub say you need +45 or higher, but most of them 
run weak sauce set-ups. I need to do some testing...

XenonDepot 6500K kit is already installed, front windows were tinted yesterday,
255/40-20 Toyo Proxes S/Ts arrive today, H&R springs going in this weekend.

Then I have to make some sick 20s for it. I'll probably do 20x9 on all four corners
but stagger the lip size. This won't be a VIP van; I need at least ONE vehicle I can
use for Vegas trips, etc!

what year did oddy switch to 5x120 must be recently because i know they used to be 5x114

[quote=epi79;139755]actually I do, but since my weird USA ody bolt pattern is 5x120 offset 45 , not 5x114.3 like JDM odyssey,  nothing I can do much with my van wheel.[/quote]

get bimmer wheels. u have plenty of selection or u can always order wheels from some company with custom width offset fir 5x120.
5x120 ain't weird at all .

accord udah dijual ?

what?  5x120 on an ody...that cant be right

[quote=Qclass;139768]rather than lead you on to a foreign site in japanese :pat: , I'll lend u a hand.
 
first of all, are u sure your bolt patternis 5x120 ? If you are sure, then look for wheels made for BMW. Your center bore of 64.1 should not be a problem either.
 
ebay has many wheels specific for BMW, I believe MRR also makes 5x120. have u checked out the mrr hr6 ? pretty sick imo.[/quote]
 
ever heard of google translater?

last time i checked numbers still looked the same on japanese sites.

[QUOTE=rg3;139787]get bimmer wheels. u have plenty of selection or u can always order wheels from some company with custom width offset fir 5x120.
5x120 ain't weird at all .

accord udah dijual ?[/QUOTE]
Dan, wah akhirnya ketemu loe jg, nice Red SP! :D
iya accord gw dah dijual, ganti odyssey sih , cuman ya gitu susah cari pelek 
sekarang cuman pake 18 mdx rims , not bad but i want more :D 

udah gw coba email ke company2 sih tapi buat costum order pricenya 2 different :(
tadinya pengen work sp tapi waitingnya 4 month dari JP
dah gitu ody temen loe yg sekarang jg pake work sp

Check out what people are putting on their BMWs, they have the same bolt pattern, 5x120.

[QUOTE=RaCinStylez;139791]what?  5x120 on an ody...that cant be right[/QUOTE]

yup Crazy honda , now all 3rd gen ody, 09 Pilot , ridgeline and latest Acura RL are using 5x120 offset 45 stock.

I did try search bmw wheel no luck most of them offset 15 or less. nothing higher than 35. 
which for odyssey will stick out a lot. it will look like mexican ride :D plus fitting bimmer rims to Japan car will not look really good. 

may be i should try that vossen wheel.

i like that OGS odyssey rims Work SP but need to custom order the wheel and the cost 3000+ is out of my range... for just daily driven car.

Yep, the 05+ Odysseys all have 5x120 with the traditional 64.1 Honda Centerbore.

I know a few guys who have used the Beyern (TSW) mesh wheel on the Ody and
it looks pretty good, especially for the $. 

The Vossen stuff is pretty good quality and it has a nice polished stainless lip
that gives it a three-piece type of look. I like the 082, but the new 094 is nice,
too. Basically, I'd have to use a BMW 3-series offset; the lowest they have is 
+35 but I could probably shave it to +38. I like the wheels aggressive anyway,
and bear in mind that the OdyClub guys are notoriously conservative. I remember
one post about the H&R springs and half of the guys were like "why would you 
want to lower it, IT'S A MINIVAN" and crap like that. I guess we should all wear
white T-shirts and drive white Impalas, too. 

"Joke 'em if they can't take a fuck!"

I've decided to build a set of three-piece wheels for it; once I get the van lowered
I'll measure it so I can figure out what's what. I might make the rears a bit more
aggressive so they sit nicely on the fender - from what I've seen, running the same 
offset front & rear leaves the rear wheels tucked-in a bit more than I'd like.

[QUOTE=epi79;139824]plus fitting bimmer rims to Japan car will not look really good. 
[/QUOTE]

There was a thread recently that I'm sure would change your mind.

Check out Breyton, Hartge, and Hamann, if you haven't already. They make BMW exclusive wheels.

I believe lexus LS460 also is 5x120

[quote=epi79;139755]actually I do, but since my weird USA ody bolt pattern is 5x120 offset 45 , not 5x114.3 like JDM odyssey,  nothing I can do much with my van wheel.[/quote]
buy the jap hubs. bolt on
or possibly buy adapter hubs. email fred goeske at wheeladapter.com
he'll make ANYTHING

[QUOTE=Blitz;139843]I believe lexus LS460 also is 5x120[/QUOTE]
damn really ? if that correct then i can use LS460 wheels , That means a lot of wheel vip with 5x120 now ?
I have to check on that.

[[QUOTE=SoCalSC4;139835]
OdyClub guys are notoriously conservative.  

I've decided to build a set of three-piece wheels for it; once I get the van lowered
I'll measure it so I can figure out what's what. I might make the rears a bit more
aggressive so they sit nicely on the fender - from what I've seen, running the same 
offset front & rear leaves the rear wheels tucked-in a bit more than I'd like.[/QUOTE]

I couldn’t agree more with you on Odyclub. They are bunch of old daddy’s crap. :)
That’s why I go back to this forum, I thought this forum dead before. 
But I go there for minor problem, electrical etc. some of member know to fixed stuff.

Last time I almost bought that wheelmax cheap rims 600 for four, they have 5x120 offset 35 20x8.5 and 20x10. 
But I’ve got a deal oh acura mdx wheel so I forgot about that. I might have to try that again.

I’ve been thinking if the van can take 19x10 and fitted with 235/50 or 55/19 if there is any. 
It will looks awesome:) I think

Why would you want such thick tires? (235/50, 55)

[QUOTE=Blitz;139843]I believe lexus LS460 also is 5x120[/QUOTE]


This is true. The OE LS 460 Touring wheels are 19x8.0 +32
but the center bores are only 60.1
You'll need a machine shop to open them to 64.1

Also, on the tires, don't forget the Gross Vehicle Weight Rating (GVWR)
is about 6,000 lbs. A standard passenger car tire won't come near the
proper load rating for this rig. Granted, 6000 lbs is a worst-case scenario,
but these things can hold 8 passengers + cargo...

The OE tires are 28.0" diameter, so a tallish tire is justified.

I went with the Toyo Proxes S/T (Sport Truck) tire, which has the proper
load rating, but looks more or less like a street car tire. The 255/40-20
is EXACTLY the same O.D. as the OE tires.

Also, the newer Ody's all have tire pressure sensors in the wheels, so make
sure the new wheels are TPMS compatible.

On using spacers/adapters, that will only make the offset issue worse...
Typically, spacers need to be at least 19mm thick to cover-up the OE
lug studs and provide a solid platform for the new PCD studs.

get this pi...
[IMG]http://img505.imageshack.us/img505/9267/dsc00907np2.jpg[/IMG]

dari florida..

[url]http://www.socaleuro.com/forum/showthread.php?t=30939[/url]

or check classified di sini..

[url]http://vipstylecars.com/forums/showthread.php?t=8236[/url]

cari pelg bimmer aja pi !!! are u thinking to run coils or bags ? get bags so you can run aggresive offset and width ;)

hamman PG3 :biggthumpup:

more....
[url]http://www.memoryfab.com/wheels/used/a20071101164934/[/url]

ballers.s..
[url]http://www.memoryfab.com/wheels/used/a20070911104245/[/url]

Aftermarket 18s or 19s are pretty tame on the Ody. Don't forget,
this is a TALL vehicle. I would consider 20s a minimum on these machines.
Don't forget, he already has 18" wheels on his Odyssey.

Not really diggin' the old school MAEs... these only look good on an old school
Infiniti or BMW.

Where's OGS when you need him??!?!

[quote=SoCalSC4;140022]Aftermarket 18s or 19s are pretty tame on the Ody. Don't forget,
this is a TALL vehicle. I would consider 20s a minimum on these machines.
Don't forget, he already has 18" wheels on his Odyssey.

Not really diggin' the old school MAEs... these only look good on an old school
Infiniti or BMW.[/quote]


u never know until u try ! :shrug:and dumped the car to the ground !

OGS is working on his car and his wheels now.. :biggthumpup:

Those Seiken would be SICK! Do it!!

[IMG]http://www.memoryfab.com/wheels/used/imglarge_20070911104245_5.jpg[/IMG]

If not you will be bakla and will have a smelly peck peck

NKB CUPS ARE FUCKIN SICK!!!!!!!!!!!

I'm getting these wheel what do you think guys ? downside is only 19 inch 
i want 20 inch 

[IMG] [url]http://i219.photobucket.com/albums/cc208/briangtpro/eclipseshoot233.jpg[/url] [/IMG]

[IMG]http://i219.photobucket.com/albums/cc208/briangtpro/eclipseshoot233.jpg[/IMG]
 
i dont like them at all, but if you like them thats all that counts.

Erm... think about it this way.

+45 offset is just 45mm (less than 2") from +0 offset.

Whatever it is, maximization of cambers and abit of a pull should solve the problem?

Oh, before the guys here jump on me... What's the max width fo the wheel? Coz without width, offset means nothing...

i'm getting 20" pics coming soon :D

I'm also doing 20" on my new Odyssey. Probably 20x9 all around.
I haven't had a chance to measure the van yet so I don't know what
exactly fits it. The "everyday" set-up on the newer Odysseys is
20x8.5 +38 to +45... not that I'm going that route...

One concern with super-aggressive offsets on the van...
the rear sliding doors.

Go too aggressive and you won't be able to get the damn doors open!! :)

[QUOTE=SoCalSC4;159218]

One concern with super-aggressive offsets on the van...
the rear sliding doors.

Go too aggressive and you won't be able to get the damn doors open!! :)[/QUOTE]

Solution to that is custom hardware for the hinges, allowing them to open further away from the van.

[QUOTE=firelizard;159262]Solution to that is custom hardware for the hinges, allowing them to open further away from the van.[/QUOTE]
yea i saw that on vipwagon magazine, i guess we have to do some customize hinges for my ody.

[QUOTE=SoCalSC4;159218]I'm also doing 20" on my new Odyssey. Probably 20x9 all around.
I haven't had a chance to measure the van yet so I don't know what
exactly fits it. The "everyday" set-up on the newer Odysseys is
20x8.5 +38 to +45... not that I'm going that route...

One concern with super-aggressive offsets on the van...
the rear sliding doors.

Go too aggressive and you won't be able to get the damn doors open!! :)[/QUOTE]

20x9 for the front looks mean , especially if you can fit 3-4 inch lip for the front like your GS that will looks good. i think you can fit 20x10 for the rear but not sure if you need to camber it all the way for daily driving