ufc21 UAS install help needed..

about to start with the bags first, gonna use stock struts for now... kinda stuck on how the lower bracket stays on the strut, when i slide it in, the bracket fits very loosely and the top one also? etc... basicly what do i do? kinda stuck here..
 
[IMG]http://i35.tinypic.com/2ed6zvp.jpg[/IMG]

did you look at this?

[url]http://universalairsuspension.com/_images/support/bagstrut.pdf[/url]

put it together exactly how it looks like it should go.

fil it over and hammer the lower spring pocket out. BUT u have to use a cut off wheel and cut off that gold retainer off, unless you can carefully cut off the lower spring pocket.

[quote=mista808;185778]fil it over and hammer the lower spring pocket out. BUT u have to use a cut off wheel and cut off that gold retainer off, unless you can carefully cut off the lower spring pocket.[/quote]
 
 
 
 
so on the shock, take off the stock lower perch by hammering it out or cut it off carefully?...  and the UAS lower bracket will just fall in place? and the gold retainer, i can just grind it til it's flush...
 
 
and the upper bracket, i understand that the strut rod itself goes throught the hole on the top bracket of the bag but why is it so loose? won't the bag just side to side? or am i missing something?  
 
any pics?
 
blackonblack, thanks for the link but it doesnt quite explain much..

got all my questions answer from Universal Air  thanks

Well whats the answer that universal air gave you? I am about to do the same thing to my 99 LS. Any install pics?

look at the topic above on how to.. i did a step by step.. you have to cut the perch off and weld the new perch on.

yea thanks... i seen ur post, helped out alot...
 
[IMG]http://i37.tinypic.com/2n9jo8n.jpg[/IMG]
 
 
im actually done with the setup... its tight and all but doesnt ride as smooth as my JP coilovers...i mean its koo for what it is but this is my daily driver and i felt like a ruined the value of this car, so i sold the whole UAS kit to one of my homies...he's gonna run these on his JIC coils.. took me 2 months of research and gathering parts and got it done last week... and i didnt want to but the bags over the coils since i like them so much and didnt wanna ruin them... so hopefully imma get a older UFC-20 and hack that one up and use this as an daily driver... 
 
i took lots of pics and was gonna start a build tread but since im not gonna run it no more, im too lazy...
 
i wanted to thank everyone that replyed to all my PM's about how to install this and that, universal air, eight08customs, Dennis (VIP-UFC   my bad homie, i didnt come thru)  and i forgot who else, i know theres more..
 
 
here yall go, laid on the ground..
 
[IMG]http://i38.tinypic.com/m7dnax.jpg[/IMG]