What are you running in your ride???
Im running Diamond HEX's up front.
MB Quarts in the back doors and deck.
Alpine PDX digital amps and and Adire Tumult 15 ported to 30hz.
All coming off my stock Bose HU and amp (hi to lo) lol..... oohhh but it sounds sooo good. This system was designed for SQ tho but it still hits.
View original BBCode
Im running Diamond HEX's up front.
MB Quarts in the back doors and deck.
Alpine PDX digital amps and and Adire Tumult 15 ported to 30hz.
All coming off my stock Bose HU and amp (hi to lo) lol..... oohhh but it sounds sooo good. This system was designed for SQ tho but it still hits.
HU - alpine iva-w200
stock front and rear
phoenix gold xenon amp
phoenix gold rsd 12" sub
waiting on some free time to put in some phoenix gold rsd 6.5 components in the front
View original BBCode
HU - alpine iva-w200
stock front and rear
phoenix gold xenon amp
phoenix gold rsd 12" sub
waiting on some free time to put in some phoenix gold rsd 6.5 components in the front
if the original poster was really interested in SQ youd ditch the stock head unit.
alpine 9835
Seas Lotus Performance mids/tweeters
Image Dynamics IDMAX 10s (x2)
or
Ascendant Audio Avalanche 15 (i switch between this and the 10's)
TRU 4.100 w/ Burr Brown for the mids and tweets
PPI PCX 2200 for the subs
0 guage wiring from the battery to a distro block down to 4 guage to the amps. 8 guage to the subs and 16 guage to the mids and tweets. 0 guage from my engine block to a ground, 0g from the pos on my battery to my alternator, and 0g from my neg on my batter to the same ground as the engine block. ditched the optima in favor of an interstate and havent looked back.
View original BBCode
if the original poster was really interested in SQ youd ditch the stock head unit.
alpine 9835
Seas Lotus Performance mids/tweeters
Image Dynamics IDMAX 10s (x2)
or
Ascendant Audio Avalanche 15 (i switch between this and the 10's)
TRU 4.100 w/ Burr Brown for the mids and tweets
PPI PCX 2200 for the subs
0 guage wiring from the battery to a distro block down to 4 guage to the amps. 8 guage to the subs and 16 guage to the mids and tweets. 0 guage from my engine block to a ground, 0g from the pos on my battery to my alternator, and 0g from my neg on my batter to the same ground as the engine block. ditched the optima in favor of an interstate and havent looked back.
Pseudonym;52709 wrote:if the original poster was really interested in SQ youd ditch the stock head unit.
You have to hear it, i've done systems with 30 band eq's and fancy digital sig processors... and this has to be one of the best yet. completley simple and sonds clean.
View original BBCode
[QUOTE=Pseudonym;52709]if the original poster was really interested in SQ youd ditch the stock head unit.
[/QUOTE]
You have to hear it, i've done systems with 30 band eq's and fancy digital sig processors... and this has to be one of the best yet. completley simple and sonds clean.
Stock now. Have an Alpine 9835?!?! with IPOD Interface I want to install.
Anyone know if the S13 harness would work in a Y33
(reason I ask is its already wired to S13 harness)
Also its a single din what should i put under it?
View original BBCode
Stock now. Have an Alpine 9835?!?! with IPOD Interface I want to install.
Anyone know if the S13 harness would work in a Y33
(reason I ask is its already wired to S13 harness)
Also its a single din what should i put under it?
stock i can bring myself to get rid of the stock nav and controls on the steering wheel
View original BBCode
stock i can bring myself to get rid of the stock nav and controls on the steering wheel
In my IS 300
Alpine 7998
MB Quart PSD 216
MB Quart 6 X 9 ( I forget what series)
Phoenix Gold Tantrum 4 Channel
JL Audio amp for sub
JL Audio 10W3v2 ( flushed in the floor)
All PG wireing, not a singel strand of factory in my setup.
FX 45
Factory cause my wife won't let me touch it.
1970 240 Z........All motor, I love listening to the turbo spool.....no stereo....
View original BBCode
In my IS 300
Alpine 7998
MB Quart PSD 216
MB Quart 6 X 9 ( I forget what series)
Phoenix Gold Tantrum 4 Channel
JL Audio amp for sub
JL Audio 10W3v2 ( flushed in the floor)
All PG wireing, not a singel strand of factory in my setup.
FX 45
Factory cause my wife won't let me touch it.
1970 240 Z........All motor, I love listening to the turbo spool.....no stereo....
Miyabita_Y33;53070 wrote:Stock now. Have an Alpine 9835?!?! with IPOD Interface I want to install.
Anyone know if the S13 harness would work in a Y33
(reason I ask is its already wired to S13 harness)
Also its a single din what should i put under it?
it wont work cause you have a factory amp.
View original BBCode
[QUOTE=Miyabita_Y33;53070]Stock now. Have an Alpine 9835?!?! with IPOD Interface I want to install.
Anyone know if the S13 harness would work in a Y33
(reason I ask is its already wired to S13 harness)
Also its a single din what should i put under it?[/QUOTE]
it wont work cause you have a factory amp.
hu - pioneer d3
front - jl audio xr650csi comps
rear - jl audio xr650cxi coax
sub - 10w7 in a ported box
and jl audio 500/1, 300/4
i wouldnt recommend jl xr, they dont have enough midbass for me. i plan on replacing them with some rainbow slc in the near future and build a sealed enclosure for the sub.
View original BBCode
hu - pioneer d3
front - jl audio xr650csi comps
rear - jl audio xr650cxi coax
sub - 10w7 in a ported box
and jl audio 500/1, 300/4
i wouldnt recommend jl xr, they dont have enough midbass for me. i plan on replacing them with some rainbow slc in the near future and build a sealed enclosure for the sub.
alpine deck
old school rockford amp
digital design subwoofers
View original BBCode
alpine deck
old school rockford amp
digital design subwoofers
Tape deck, boombox in the back.
View original BBCode
Tape deck, boombox in the back.
# Pioneer Avic N2 Dvd/Navi/Mp3
# 2 XO vision 6 inch monitors
# JL Audio 12w3v2 Sub
# MTX Audio 4 Channel Amp
# MTX Audio 1 Channel Amp
# Infinity Kappa Series 50.7 CS Component speakers
# Rear back up camera
# Apple Mini Ipod mp3 player
View original BBCode
# Pioneer Avic N2 Dvd/Navi/Mp3
# 2 XO vision 6 inch monitors
# JL Audio 12w3v2 Sub
# MTX Audio 4 Channel Amp
# MTX Audio 1 Channel Amp
# Infinity Kappa Series 50.7 CS Component speakers
# Rear back up camera
# Apple Mini Ipod mp3 player
Kenwood DNX 7100 head unit, DVD, NAV, Ipod Video built in
MB Quart Psc 210 6.5" front and rear components
2 Eclipse 2120 400 watt amps, 1 for each set of components
1 eclipse 34230(its big) 800 continuous for sub.
1 TC Sounds TC-2000 12" in a double walled sealed box. SUPER clean and not very quiet(30mm x-max each way).
Pretty much entire car dynamatted, except where OEM sound deadening sheets were laid.
View original BBCode
Kenwood DNX 7100 head unit, DVD, NAV, Ipod Video built in
MB Quart Psc 210 6.5" front and rear components
2 Eclipse 2120 400 watt amps, 1 for each set of components
1 eclipse 34230(its big) 800 continuous for sub.
1 TC Sounds TC-2000 12" in a double walled sealed box. SUPER clean and not very quiet(30mm x-max each way).
Pretty much entire car dynamatted, except where OEM sound deadening sheets were laid.
UcanTry;58026 wrote:yeah yeah yeah i talked to audio one and they want 6000 for the system i want
what do u want?
View original BBCode
[QUOTE=UcanTry;58026]yeah yeah yeah i talked to audio one and they want 6000 for the system i want[/QUOTE]
what do u want?
Premier DEH-7700MP
Pioneer TS 6x9's
2x JL W010
RF 300.1
Nothin' fancy, all that's left is to upgrade the fronts
View original BBCode
Premier DEH-7700MP
Pioneer TS 6x9's
2x JL W010
RF 300.1
Nothin' fancy, all that's left is to upgrade the fronts
as of right now this is what i'm running:
kenwood ddx-7015
2 alpine mrd-m605 amps for my sub
1 alpine mrd-m345 for my doors
1 10" polk sr subwoofer
set of 6.5 polk momo components for front
set of 6.5 polk momo coax for rear
car is ran with tsunami wires
View original BBCode
as of right now this is what i'm running:
kenwood ddx-7015
2 alpine mrd-m605 amps for my sub
1 alpine mrd-m345 for my doors
1 10" polk sr subwoofer
set of 6.5 polk momo components for front
set of 6.5 polk momo coax for rear
car is ran with tsunami wires
Head: Pioneer AVIC-D1 double-DIN nav unit w/ iPod module
Front drivers: Boston Z5 separates
Rear drivers: Boston Pro Series 4.5 separates
Sub: Boston Pro 12.5LF 2-ohm
Amp, separates: Boston GT-42 4x75 watt
Amp, sub: Boston GT-28 1x1100 watt (at dual mono, 2-ohm)
Boston remote sub controller
Sound deadening: Dynamat Extreme
Wire: all Monster Cable... RCAs, speaker wire, 2x 60-amp circuit breakers, Competition battery terminals, capacitors
Special thanks to Sandy and Leif at Boston Acoustics
and Noel Lee at Monster Cable.
View original BBCode
Head: Pioneer AVIC-D1 double-DIN nav unit w/ iPod module
Front drivers: Boston Z5 separates
Rear drivers: Boston Pro Series 4.5 separates
Sub: Boston Pro 12.5LF 2-ohm
Amp, separates: Boston GT-42 4x75 watt
Amp, sub: Boston GT-28 1x1100 watt (at dual mono, 2-ohm)
Boston remote sub controller
Sound deadening: Dynamat Extreme
Wire: all Monster Cable... RCAs, speaker wire, 2x 60-amp circuit breakers, Competition battery terminals, capacitors
Special thanks to Sandy and Leif at Boston Acoustics
and Noel Lee at Monster Cable.
2002 F50
Stock Bose System:thumbsup:
View original BBCode
2002 F50
Stock Bose System:thumbsup:
SoCalSC4;63368 wrote:
Sound deadening: Dynamat Extreme
how much did you spend on that alone?
View original BBCode
[quote=SoCalSC4;63368]
Sound deadening: Dynamat Extreme
[/quote]
how much did you spend on that alone?
save your money on the dynamat and use
Raammat instead. works amazingly. i personally use it in my car and previous installs and have read countless reviews from people who share my praises.
View original BBCode
save your money on the dynamat and use [url=http://www.raamaudio.com/cgi-bin/index.cgi]Raammat[/url] instead. works amazingly. i personally use it in my car and previous installs and have read countless reviews from people who share my praises.
is it cheaper?
View original BBCode
is it cheaper?
muuuuch cheaper.
View original BBCode
muuuuch cheaper.
all digital designs audio stuff and a batcap battery
View original BBCode
all digital designs audio stuff and a batcap battery
Kenwood DNX7100 DD DVD/NAV/Ipod VIDEO integrated.
MB Quart Reference 6.5" components front and rear.
-Two Eclipse 400 watt amps powering each set of components.(cant remember model numbers)
TC Sounds TC-2000 12" woofer in double walled Sealed box.
-Eclipse 1600 watt amp for woofer. Cant remember model number.
All sound quality and its amazing. But if turned up you can hear and feel me comin towards ya.
View original BBCode
Kenwood DNX7100 DD DVD/NAV/Ipod VIDEO integrated.
MB Quart Reference 6.5" components front and rear.
-Two Eclipse 400 watt amps powering each set of components.(cant remember model numbers)
TC Sounds TC-2000 12" woofer in double walled Sealed box.
-Eclipse 1600 watt amp for woofer. Cant remember model number.
All sound quality and its amazing. But if turned up you can hear and feel me comin towards ya.
bull crap, stop being fooled by internet car audio forums and brand names.
You can use an aftermarket deck and still inhibit various gremlins such as ground noises etc. You can use a oem deck with quality converter and get ZERO noise and besides, MOST of today's aftermarket headunits are JUNK, you'd be lucky if the quality was as goods a oem headunit.
the fact is, equipment has little to do with it. the install and knowing your equipment is more important.
Pseudonym;52709 wrote:if the original poster was really interested in SQ youd ditch the stock head unit.
alpine 9835
Seas Lotus Performance mids/tweeters
Image Dynamics IDMAX 10s (x2)
or
Ascendant Audio Avalanche 15 (i switch between this and the 10's)
TRU 4.100 w/ Burr Brown for the mids and tweets
PPI PCX 2200 for the subs
0 guage wiring from the battery to a distro block down to 4 guage to the amps. 8 guage to the subs and 16 guage to the mids and tweets. 0 guage from my engine block to a ground, 0g from the pos on my battery to my alternator, and 0g from my neg on my batter to the same ground as the engine block. ditched the optima in favor of an interstate and havent looked back.
View original BBCode
bull crap, stop being fooled by internet car audio forums and brand names.
You can use an aftermarket deck and still inhibit various gremlins such as ground noises etc. You can use a oem deck with quality converter and get ZERO noise and besides, MOST of today's aftermarket headunits are JUNK, you'd be lucky if the quality was as goods a oem headunit.
the fact is, equipment has little to do with it. the install and knowing your equipment is more important.
[quote=Pseudonym;52709]if the original poster was really interested in SQ youd ditch the stock head unit.
alpine 9835
Seas Lotus Performance mids/tweeters
Image Dynamics IDMAX 10s (x2)
or
Ascendant Audio Avalanche 15 (i switch between this and the 10's)
TRU 4.100 w/ Burr Brown for the mids and tweets
PPI PCX 2200 for the subs
0 guage wiring from the battery to a distro block down to 4 guage to the amps. 8 guage to the subs and 16 guage to the mids and tweets. 0 guage from my engine block to a ground, 0g from the pos on my battery to my alternator, and 0g from my neg on my batter to the same ground as the engine block. ditched the optima in favor of an interstate and havent looked back.[/quote]
QoozyFoozy;72381 wrote:
the fact is, equipment has little to do with it. the install and knowing your equipment is more important.
100% TRUE
View original BBCode
[quote=QoozyFoozy;72381]
the fact is, equipment has little to do with it. the install and knowing your equipment is more important.[/quote]
100% TRUE
i agree that instal is AT LEAST 95% of a great sounding setup. and yeah, youre right that most aftermarket head units are garbage, but the same can be said about oem. its all trial and error with this hobby. i was speaking in generalities about the oem radio. its very rare that u will find an oem + converter that will be on par with most of the higher end, less bling based, more SQ oriented decks. though, its becoming more common these days with the higher end OEM setups being more focused on great sound.
and what makes u think im being fooled by brand names? look through my list of gear, the only thing youll find that really has a big brand name attatched to it is the head unit. and its a well known fact that this is one of alpines better head units of recent years.
View original BBCode
i agree that instal is AT LEAST 95% of a great sounding setup. and yeah, youre right that most aftermarket head units are garbage, but the same can be said about oem. its all trial and error with this hobby. i was speaking in generalities about the oem radio. its very rare that u will find an oem + converter that will be on par with most of the higher end, less bling based, more SQ oriented decks. though, its becoming more common these days with the higher end OEM setups being more focused on great sound.
and what makes u think im being fooled by brand names? look through my list of gear, the only thing youll find that really has a big brand name attatched to it is the head unit. and its a well known fact that this is one of alpines better head units of recent years.
what i am running
in my toyota crown i have jvc dvd/cd full face single din
a 7 inch widescreen mounted in the factory screen position i took the original out due to not being able to read japanese.
5 3/4 inch jvc kevlar components in the front
5 3/4 inch 2 way kevlars in the rear doors
1 12 inch 500watt clarion dual voice coil sub in custom made sealed box
and a 4x125 rms clarion vnet amp.
i just have basic wiring because its not a huge system but i only listen to metal and its pretty friggin loud so it will be fine for now. until i get the money for a roof mount screen in the rear between 12- 15 inch.
View original BBCode
in my toyota crown i have jvc dvd/cd full face single din
a 7 inch widescreen mounted in the factory screen position i took the original out due to not being able to read japanese.
5 3/4 inch jvc kevlar components in the front
5 3/4 inch 2 way kevlars in the rear doors
1 12 inch 500watt clarion dual voice coil sub in custom made sealed box
and a 4x125 rms clarion vnet amp.
i just have basic wiring because its not a huge system but i only listen to metal and its pretty friggin loud so it will be fine for now. until i get the money for a roof mount screen in the rear between 12- 15 inch.
SoCalSC4;63368 wrote:Head: Pioneer AVIC-D1 double-DIN nav unit w/ iPod module
Front drivers: Boston Z5 separates
Rear drivers: Boston Pro Series 4.5 separates
Sub: Boston Pro 12.5LF 2-ohm
Amp, separates: Boston GT-42 4x75 watt
Amp, sub: Boston GT-28 1x1100 watt (at dual mono, 2-ohm)
Boston remote sub controller
Sound deadening: Dynamat Extreme
Wire: all Monster Cable... RCAs, speaker wire, 2x 60-amp circuit breakers, Competition battery terminals, capacitors
Special thanks to Sandy and Leif at Boston Acoustics
and Noel Lee at Monster Cable.
pmmed you
View original BBCode
[QUOTE=SoCalSC4;63368]Head: Pioneer AVIC-D1 double-DIN nav unit w/ iPod module
Front drivers: Boston Z5 separates
Rear drivers: Boston Pro Series 4.5 separates
Sub: Boston Pro 12.5LF 2-ohm
Amp, separates: Boston GT-42 4x75 watt
Amp, sub: Boston GT-28 1x1100 watt (at dual mono, 2-ohm)
Boston remote sub controller
Sound deadening: Dynamat Extreme
Wire: all Monster Cable... RCAs, speaker wire, 2x 60-amp circuit breakers, Competition battery terminals, capacitors
Special thanks to Sandy and Leif at Boston Acoustics
and Noel Lee at Monster Cable.[/QUOTE]
pmmed you
yay! a show off your gear thread. i knew i had these pictures for a reason.
nothin installed yet but here's the rundown.
build 1:
carputer with onkyo se-90pci soundcard (not pictured)
tru s44/s500 amps (waiting for the 6 channel to come out and then i'm going to consolidate)
tru ssld6 line driver
dynaudio esotec system 242
dynaudio mw182 sub (not purchased yet)
build 2:
eclipse cd3100
dayton nd28/rs100/rs225 3 way active 1"/4"/8" components (not pictured)
phoenix gold xs6600
other:
image dynamics oem 6.5" mids
blaupunkt vc100 tweeters
cerwin vega exl 350.2/400.4 amps
image dynamics idq12v2.d2 sub
wiring out the wazoo
View original BBCode
yay! a show off your gear thread. i knew i had these pictures for a reason.
[IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/DSCF03622.jpg[/IMG]
[IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/DSCF03632.jpg[/IMG]
nothin installed yet but here's the rundown.
build 1:
carputer with onkyo se-90pci soundcard (not pictured)
tru s44/s500 amps (waiting for the 6 channel to come out and then i'm going to consolidate)
tru ssld6 line driver
dynaudio esotec system 242
dynaudio mw182 sub (not purchased yet)
build 2:
eclipse cd3100
dayton nd28/rs100/rs225 3 way active 1"/4"/8" components (not pictured)
phoenix gold xs6600
other:
image dynamics oem 6.5" mids
blaupunkt vc100 tweeters
cerwin vega exl 350.2/400.4 amps
image dynamics idq12v2.d2 sub
wiring out the wazoo
Tanomack;63409 wrote:2002 F50
Stock Bose System:thumbsup:
how can u leave it stock bro? personally i think the bose in our cars are terrible. maybe if i listened to classical 24/7 it would suffice.
anyway i got a kenwood excelon kvt 819 in dash fiberglassed in with mb quart Q series components all around.
2 infinity amps 1300 watt n 4x112 or somethin (changing to mb quart soon as my exterior is done)
pioneer premier 12" carbon fiber sub.
Oh n a kinetik 1400 battery that itd like to move to the trunk and put a powermaster up front.
also used a grand worth of sound deadening on top of a bulk pack of dynamat xtreme. ceramic heat and sound absorbing paste along with other floor vinyl foams from secondskin audio. i recommend their products over all other competitors. their 'damplifier pro' is so many times better than dynamat xtreme i kick myself for spending the extra on dynamat on my last 3 cars when i could have used second skin.
google sound deadener showdown and you'll see why.
View original BBCode
[quote=Tanomack;63409]2002 F50
Stock Bose System:thumbsup:[/quote]
how can u leave it stock bro? personally i think the bose in our cars are terrible. maybe if i listened to classical 24/7 it would suffice.
anyway i got a kenwood excelon kvt 819 in dash fiberglassed in with mb quart Q series components all around.
2 infinity amps 1300 watt n 4x112 or somethin (changing to mb quart soon as my exterior is done)
pioneer premier 12" carbon fiber sub.
Oh n a kinetik 1400 battery that itd like to move to the trunk and put a powermaster up front.
also used a grand worth of sound deadening on top of a bulk pack of dynamat xtreme. ceramic heat and sound absorbing paste along with other floor vinyl foams from secondskin audio. i recommend their products over all other competitors. their 'damplifier pro' is so many times better than dynamat xtreme i kick myself for spending the extra on dynamat on my last 3 cars when i could have used second skin.
google sound deadener showdown and you'll see why.
damn i need to step up the game!
im running the factory navi with ML package!! ahahaha sounds pretty alright to me.
View original BBCode
damn i need to step up the game!
im running the factory navi with ML package!! ahahaha sounds pretty alright to me.
I've spent a crap load of money on my gear what can I say I love high end shit LOL
Ice:
Hu: pioneer 880prs
Highs: hertz hsk 165 components and I'm running no rear fill
High amp: arc audio 4050xxk
Low: single hertz Mille 2500 ported
Low amp: arc audio 2500xxk
And all kicker wiring
This set up was aimed for sound quality and gets pretty loud when I want it too
And as off right now I'm about to switch it up on Monday
View original BBCode
I've spent a crap load of money on my gear what can I say I love high end shit LOL
Ice:
Hu: pioneer 880prs
Highs: hertz hsk 165 components and I'm running no rear fill
High amp: arc audio 4050xxk
Low: single hertz Mille 2500 ported
Low amp: arc audio 2500xxk
And all kicker wiring
This set up was aimed for sound quality and gets pretty loud when I want it too
And as off right now I'm about to switch it up on Monday
in my 1st gen Ls400 i have:
-infinity capa speakers all around
-2 12inch L5 kickers
-Rockford p-500x2 amp (doesnt want 2 cooperate wit the kickers)
:signdammit:
-2.4 farad capacitor
-dynameted most of the truck (gota add a lil more tho)
thats it for me as of whats in the car, nothin 2 crazy
im gona get 1 of the kenwood ddx double dins real soon
View original BBCode
in my 1st gen Ls400 i have:
-infinity capa speakers all around
-2 12inch L5 kickers
-Rockford p-500x2 amp (doesnt want 2 cooperate wit the kickers)
:signdammit:
-2.4 farad capacitor
-dynameted most of the truck (gota add a lil more tho)
thats it for me as of whats in the car, nothin 2 crazy
im gona get 1 of the kenwood ddx double dins real soon
- Optima Yellow Top.
- Stock headunit with factory trunk mounted cd changer.
- Stock Bose door speakers.
- Rear deck speakers removed.
- Two old school Orion HCCA 12's in a huge ported box.
- Logic Soundlabs GSX32 Class D monoblock amp.
- 8ga wiring.
Hits like a motherfucker. And the door speakers can keep up with it.
I also have a few other rare old school heavy hitter subs laying around in boxes unused.

View original BBCode
- Optima Yellow Top.
- Stock headunit with factory trunk mounted cd changer.
- Stock Bose door speakers.
- Rear deck speakers removed.
- Two old school Orion HCCA 12's in a huge ported box.
- Logic Soundlabs GSX32 Class D monoblock amp.
- 8ga wiring.
Hits like a motherfucker. And the door speakers can keep up with it.
I also have a few other rare old school heavy hitter subs laying around in boxes unused.
[IMG]http://img.photobucket.com/albums/v46/BLeeDTHeLieS/HCCA/Picture001.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v46/BLeeDTHeLieS/HCCA/Picture004.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v46/BLeeDTHeLieS/Q45t/Picture005.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v46/BLeeDTHeLieS/Q45t/Picture007.jpg[/IMG]
sweet jesus u should wrap your trunk in carpet or vinyl lol. haha so u only have 2 speakers and 2 subs running??
View original BBCode
sweet jesus u should wrap your trunk in carpet or vinyl lol. haha so u only have 2 speakers and 2 subs running??
jaynick808;196192 wrote:haha so u only have 2 speakers and 2 subs running??
that's all you need if you do it right. 5 speakers total; 2 tweets, 2 mids, 1 sub.
View original BBCode
[quote=jaynick808;196192]haha so u only have 2 speakers and 2 subs running??[/quote]
that's all you need if you do it right. 5 speakers total; 2 tweets, 2 mids, 1 sub.
chaotic_mindz;195920 wrote:I've spent a crap load of money on my gear what can I say I love high end shit LOL
Ice:
High amp: arc audio 4050xxk
Low amp: arc audio 2500xxk
you
could say you like overpaying. when you pull that 4050xxk out check out the guts, then check this out:
tell me what you paid and i'll tell you what i paid.
View original BBCode
[quote=chaotic_mindz;195920]I've spent a crap load of money on my gear what can I say I love high end shit LOL
Ice:
High amp: arc audio 4050xxk
Low amp: arc audio 2500xxk
[/quote]
you [I]could [/I]say you like overpaying. when you pull that 4050xxk out check out the guts, then check this out:
[IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/DSCF03713.jpg[/IMG]
tell me what you paid and i'll tell you what i paid.
jaynick808;196192 wrote:sweet jesus u should wrap your trunk in carpet or vinyl lol. haha so u only have 2 speakers and 2 subs running??
No, I have the front door speakers and tweeters, then I have the rear door speakers. Just the rear decks were taken out. With subs the deck speakers are useless. Plus even on a stock Y33 system, it sounds better when the decks are removed or at least unplugged.
View original BBCode
[QUOTE=jaynick808;196192]sweet jesus u should wrap your trunk in carpet or vinyl lol. haha so u only have 2 speakers and 2 subs running??[/QUOTE]
No, I have the front door speakers and tweeters, then I have the rear door speakers. Just the rear decks were taken out. With subs the deck speakers are useless. Plus even on a stock Y33 system, it sounds better when the decks are removed or at least unplugged.
BLKonBLK98;196215 wrote:you could say you like overpaying. when you pull that 4050xxk out check out the guts, then check this out:

tell me what you paid and i'll tell you what i paid.
i paid 9bills for both amps new from innovative rides
View original BBCode
[QUOTE=BLKonBLK98;196215]you [I]could [/I]say you like overpaying. when you pull that 4050xxk out check out the guts, then check this out:
[IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/DSCF03713.jpg[/IMG]
tell me what you paid and i'll tell you what i paid.[/QUOTE]
i paid 9bills for both amps new from innovative rides
did you check out the board?
View original BBCode
did you check out the board?
BLKonBLK98;196952 wrote:did you check out the board?
Naw but Ill take your word for it I'm too lazy I didn't have time I had to meet up with with someone that bought my sub so yeah new sub and box today
how much did you pay
View original BBCode
[QUOTE=BLKonBLK98;196952]did you check out the board?[/QUOTE]
Naw but Ill take your word for it I'm too lazy I didn't have time I had to meet up with with someone that bought my sub so yeah new sub and box today
how much did you pay
$150 for the pair. nib.
CV EXL350.2 = Arc 2100xxk
CV EXL400.4 = Arc 4050xxk
View original BBCode
$150 for the pair. nib.
CV EXL350.2 = Arc 2100xxk
CV EXL400.4 = Arc 4050xxk
BLKonBLK98;197080 wrote:$150 for the pair. nib.
CV EXL350.2 = Arc 2100xxk
CV EXL400.4 = Arc 4050xxk
From where?
View original BBCode
[QUOTE=BLKonBLK98;197080]$150 for the pair. nib.
CV EXL350.2 = Arc 2100xxk
CV EXL400.4 = Arc 4050xxk[/QUOTE]
From where?
i bought them off a member on another forum. when cv cleared them out they were on ubid even cheaper than what i paid. you can still find them on ebay pretty low. i actually just listed mine at $180.
View original BBCode
i bought them off a member on another forum. when cv cleared them out they were on ubid even cheaper than what i paid. you can still find them on ebay pretty low. i actually just listed mine at $180.
i think i saw your FS thread on diyma. im still considering those exl's for my sisters uber budget setup.
View original BBCode
i think i saw your FS thread on diyma. im still considering those exl's for my sisters uber budget setup.
yeah... that's me. i don't know why but nothing seems to be selling. guess times are hard all over. with the cashback offer there are some nice prices.
i've got a pretty complete budget system if she's interested.
View original BBCode
yeah... that's me. i don't know why but nothing seems to be selling. guess times are hard all over. with the cashback offer there are some nice prices.
i've got a pretty complete budget system if she's interested.
Bone stock with JBL amp
View original BBCode
Bone stock with JBL amp
Factory HU
RF 3Sixty.2 (OEM Integration)
Dice R4 for Aux & Ipod (6-disk DVD & iPhone capabilities)
(4) Alpine PDX - (2) 1.1000 (2) 4.150
(1) Alumapro CAP5 V2 - Alumapro CAP 5 V2 (for Subs)
(1) Critical Mass RS5 (5-1/4")- Center Channel
(4) Critical Mass T1A - (30mm) Tweeters - 2 front and 2 rear
(4) Eminence Midranges 6-1/2"
(2) Alpine Type X Subs in a Sealed FiberGlassed Enclosure
(1) Rear View Camera
(2) Kinetic power cells - 1800 (engine) & 2400 (trunk)
View original BBCode
Factory HU
RF 3Sixty.2 (OEM Integration)
Dice R4 for Aux & Ipod (6-disk DVD & iPhone capabilities)
(4) Alpine PDX - (2) 1.1000 (2) 4.150
[COLOR=white](1) Alumapro CAP5 V2 - Alumapro CAP 5 V2 (for Subs)[/COLOR]
(1) Critical Mass RS5 (5-1/4")- Center Channel
(4) Critical Mass T1A - (30mm) Tweeters - 2 front and 2 rear
(4) Eminence Midranges 6-1/2"
(2) Alpine Type X Subs in a Sealed FiberGlassed Enclosure
(1) Rear View Camera
(2) Kinetic power cells - 1800 (engine) & 2400 (trunk)
Kenwood DNX8120
Rockford 3Sixty.2 EQ
Hertz MLK 165
Hertz HSK 165
JL 13W7
Audison LRX5.1K
Escort SRX radar w laser defusers
View original BBCode
Kenwood DNX8120
Rockford 3Sixty.2 EQ
Hertz MLK 165
Hertz HSK 165
JL 13W7
Audison LRX5.1K
Escort SRX radar w laser defusers
Head unit and multimedia
Alpine TME- M740bt touch sceen w/ Alpine VPA-B222 Vehicle Hub Pro
Alpine Full speed cable and Alpine Video Ipod interface
Alpine VPE-S431 expansion Module (multi-sourcing)
Alpine PXA-H701 5.1 Digital EQ
Alpine DVE-5210 (stand alone dvd player)
Concept 9 inch headrest monitors (black)
Alpine PKG-M780 headrest monitors
XO-Vision Video amplifier
Speakers
Dynaudio 2-way components (x252)
HERTZ 2-way components
Amps
Arc audio XXK-4150 (4ch.)
Arc audio FD1800 (sub amp)
Alpine PDX 2.150 (rear speaker)
Subs
RE SR 10 inch subs (2)
Alarm
Viper 2 way remote start
DEI Voice Module
Power
Kinetik 1400 (front)
Kinetik 1800 (back up)
Kicker 1/0 Gauge power wire
View original BBCode
Head unit and multimedia
Alpine TME- M740bt touch sceen w/ Alpine VPA-B222 Vehicle Hub Pro
Alpine Full speed cable and Alpine Video Ipod interface
Alpine VPE-S431 expansion Module (multi-sourcing)
Alpine PXA-H701 5.1 Digital EQ
Alpine DVE-5210 (stand alone dvd player)
Concept 9 inch headrest monitors (black)
Alpine PKG-M780 headrest monitors
XO-Vision Video amplifier
Speakers
Dynaudio 2-way components (x252)
HERTZ 2-way components
Amps
Arc audio XXK-4150 (4ch.)
Arc audio FD1800 (sub amp)
Alpine PDX 2.150 (rear speaker)
Subs
RE SR 10 inch subs (2)
Alarm
Viper 2 way remote start
DEI Voice Module
Power
Kinetik 1400 (front)
Kinetik 1800 (back up)
Kicker 1/0 Gauge power wire
View original BBCode
[img]http://www.q45.org/gallery2/d/37601-1/Picture+029.jpg[/img]
I have stock shit for now ;( until Memphis is in the car
View original BBCode
I have stock shit for now ;( until Memphis is in the car
marksport;207266 wrote:
interesting setup. the rear bumper sensors with the camera drilled in is kinda busy in my opinion but i know its very functional. quad setup is different. never see quad f50's.
View original BBCode
[quote=marksport;207266][IMG]http://www.q45.org/gallery2/d/37601-1/Picture+029.jpg[/IMG][/quote]
interesting setup. the rear bumper sensors with the camera drilled in is kinda busy in my opinion but i know its very functional. quad setup is different. never see quad f50's.
Camera was to be used as a chasecam. Quad tips was part of the package. Just as rare as the supercharger system.
View original BBCode
Camera was to be used as a chasecam. Quad tips was part of the package. Just as rare as the supercharger system.
speaking of that hows that rebuild going ive been checking the forums but no updates. i hope its going well.
View original BBCode
speaking of that hows that rebuild going ive been checking the forums but no updates. i hope its going well.
i just sold my tru amp for a zuki eleets and traded my arc cxl2050 for an arc ks1000.1. my new setup once i get it all in there will be
alpine 9835 running active
seas lotus performance tweeters
im gonna swap out my lotus performance mids for my RE XXX mids or the focal k2p mids.
im gonna replace my ascendant audio atlas 12 for my avalanche 15.
the zuki will run my mids/tweets
the arc will run the avalanche
its gonna be serious.
View original BBCode
i just sold my tru amp for a zuki eleets and traded my arc cxl2050 for an arc ks1000.1. my new setup once i get it all in there will be
alpine 9835 running active
seas lotus performance tweeters
im gonna swap out my lotus performance mids for my RE XXX mids or the focal k2p mids.
im gonna replace my ascendant audio atlas 12 for my avalanche 15.
the zuki will run my mids/tweets
the arc will run the avalanche
its gonna be serious.
not much as I've been waiting for some custom parts before test assembly. Then I'll get the transmission rebuilt for the extra power and looking for new suspension setup.
View original BBCode
not much as I've been waiting for some custom parts before test assembly. Then I'll get the transmission rebuilt for the extra power and looking for new suspension setup.
infinityzzzz
View original BBCode
infinityzzzz
bose stock head unit
phoenix gold limited edition outlaw amp
and phoenix gold ti10d sub
View original BBCode
bose stock head unit
phoenix gold limited edition outlaw amp
and phoenix gold ti10d sub