Thread #16353
installed coilovers on my03 gs300 2nite and when i finished my abs and vsc light came on. i didnt disconnect any sensors or nething. any suggestion?
when u took ur suspension off did u let the rotor hang? Because the sensors are really delicate and can be messed up from the inside if the wire is pulled. You should always make sure that you dont let ur whole assembly hang. you might have to get a new wire sensor.
Also its one of the 2 in the front so you can try to find out which one or just get both for each side. I hope that helps.
sounds like you toasted up the wire to one of the wheel speed sensors.
I already check his ride at work.. I found the problem on the driver side suspension where the ABS plug sit at.. My buddy didnt pay attention the ABS wire hanging and they sit in wrong position.. When he make the wheel turn and I see the wire pull too short where the rotor at.. I told ADAM stop stop turn the wheel cuz I found the wire.. So he need to buy a abs sensor...
You can try repairing the speed sensor wire. [url]http://www.projectgs.com/DIY/SuspBrake/ABSVSC/index.htm[/url]
mine has been like that for like a year!!! F&$# ABS!!
volkgt7;233870 wrote:mine has been like that for like a year!!! F&$# ABS!!
[quote=volkgt7;233870]mine has been like that for like a year!!! F&$# ABS!![/quote] lol..... my bracket that holds the abs cable to the coilover snapped....
yeah i wasn't paying attention and when i set up my coil overs i had the bracket for the wheel speed sensor positioned wrong. so when i turned the wheels i streached the right front wheel speed sensor. :pat: thus ruined the sensor. well lesson learned. on a better note my GS is SLAMMED!!!!!!!!!!!!!!!!!!!!!
importedkaos;233913 wrote: on a better note my GS is SLAMMED!!!!!!!!!!!!!!!!!!!!!
[quote=importedkaos;233913] on a better note my GS is SLAMMED!!!!!!!!!!!!!!!!!!!!![/quote] Pics or it didnt happen! ahahaha jk well just get your sensor fixed so your mind could be eased.
AutofashionFred;233238 wrote:when u took ur suspension off did u let the rotor hang? Because the sensors are really delicate and can be messed up from the inside if the wire is pulled. You should always make sure that you dont let ur whole assembly hang. you might have to get a new wire sensor.
[quote=AutofashionFred;233238]when u took ur suspension off did u let the rotor hang? Because the sensors are really delicate and can be messed up from the inside if the wire is pulled. You should always make sure that you dont let ur whole assembly hang. you might have to get a new wire sensor.[/quote] ^^talkin from experience rite there.... i've also seen this shit all the time when i fix peoples fuck ups when they change out those ball joints..
importedkaos;233913 wrote:yeah i wasn't paying attention and when i set up my coil overs i had the bracket for the wheel speed sensor positioned wrong. so when i turned the wheels i streached the right front wheel speed sensor. :pat: thus ruined the sensor. well lesson learned. on a better note my GS is SLAMMED!!!!!!!!!!!!!!!!!!!!!
[quote=importedkaos;233913]yeah i wasn't paying attention and when i set up my coil overs i had the bracket for the wheel speed sensor positioned wrong. so when i turned the wheels i streached the right front wheel speed sensor. :pat: thus ruined the sensor. well lesson learned. on a better note my GS is SLAMMED!!!!!!!!!!!!!!!!!!!!![/quote] Hurry up buddy, show them pics of ur ride.. YEs his car is super slam :dance:
PICS OR BAN! haha
You messed up your Speed Sensor while Slamming your Car. Boom Roasted. [URL]http://www.youtube.com/watch?v=9Wqzeo4KQdM[/URL] :smiley-rofl: