20" Work Rezax II

Work Rezax II in chrome with polished lip.
20x9.5 +32 Falken ST-115 255/35ZR20 40%
20x11 +23 Falken ST-115 275/35ZR20 (4/26/09 replaced with new 99.5% new)

I bought these off a guy who used it on a Lexus GS300 and then I bought it and used it on my Infiniti Q45.   The sizing should fit 350Z/G35 from what I've seen other people run.    Lips and face has some scores from rocks and whatever elements wheels normally encounter on the road.  Nothing big or major.   No dents.   Front right rim has some curb check but again nothing crazy.   Not sure when these were manufactured but it's been years.    I've been told these have forged faces therefore the pretty decent light weight for 20s.    Currently running Falken ST-115 tires all around with alittle stretch.   These are discontinued so are near impossible to find in these size.

$2750 OR BEST OFFER picked up

Located in Southern California Orange County

[IMG]http://i285.photobucket.com/albums/ll56/tony42378/P1010857.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/P1010732.jpg[/IMG]
[IMG]http://i285.photobucket.com/albums/ll56/tony42378/P1010582.jpg[/IMG]

bump for some clean wheels

man i know im gona need more then just a shave in the rear to make these hoes fit!!!! :(

do you have a side profile picture of the car.  Wanna see how close you are to the fenders.    The rears  I assume are rolled, what about the front?   I have a 05 Q45

fronts are not rolled or cut.  I do touch the inner lining if I hit a bump hard enough.   Rears I trimmed the quarter panel pretty much to the max.   I also maxed out the rear stock camber adjuster as much as I could and that helped a couple mm.   I get some rubbing in the rear but I think it's more the plastic lining.   It was more noticeable when I had people and heavy stuff in trunk.

[IMG]http://i285.photobucket.com/albums/ll56/tony42378/P1010744.jpg[/IMG]

[QUOTE=xxjustimajinxx;243797]man i know im gona need more then just a shave in the rear to make these hoes fit!!!! :([/QUOTE]

I bought these off a GS300 but he slightly flared the fenders out to make these guys fit.  Not sure what he did to the front.   

Here is the link of the car these rims used to be on [url]http://speedhunters.com/archive/2008/06/03/car-spotlight-gt-gt-xs-engineering-gs400-turbo.aspx[/url]

9.5 +32 will go in front easy as pie, even will be a bit sunken if you're dumped and running around -2 camber
 
11 +23 isnt *that* crazy. id say replace the tyres on there with something like 265/30 or 255/35 and then you'd need to shave your guards right down and run around -2 maybe -3 camber.
 
or do a bit less shaving or go the 35 series tyre and run like -4 camber.
 
nice rims btw :biggthumpup:
 
EDIT - i say the above in comparison to my own wheels which are 19s but are almost the same effective specs up front, and are about 13mm less aggressive up back. my rears are rolled 1/2 flat not shaved so theres another 10mm of room to gain there, and im running -2 camber which is the least they can give me at my ride height. So shave and bit more camber you will be A okay on GS

edit bump....replaced the rear tires with the exact same brand and size

can u do 2500 shipped

no but I think I can work something out without tires.   PM your location.   I could possibly take the rims and tires off and just ship the rims.

my location st.louis MO 63304

what would your price be without tires, im local and can pick up as well, so no need for shipping.