Thread #21384

Where to get adapters for fitting BMW wheels on 5x114.3

10 archived posts · 1,917 historical views

AME_VIPApril 15, 2010
#314184

Where to get adapters for fitting BMW wheels on 5x114.3

I have read some of the threads about getting 16mm adapters to fit BMW 7 series wheels on 5x114.3

Where can you get these adapters?
View original BBCode
I have read some of the threads about getting 16mm adapters to fit BMW 7 series wheels on 5x114.3

Where can you get these adapters?
DamicciApril 15, 2010
#314246
Ebay seems to be the most common place.
View original BBCode
Ebay seems to be the most common place.
johgarApril 17, 2010
#314551
Try this. www.adaptitusa.com
View original BBCode
Try this. [url]www.adaptitusa.com[/url]
gatoApril 17, 2010
#314559
this is where i got mines...

http://www.motorsport-tech.com/


lowest they will go is 14mm thick and still convert... you might wana check to see if your wheels have pockets on the pad for the extra stud that sticks out or cut it of...
View original BBCode
this is where i got mines...
 
[URL]http://www.motorsport-tech.com/[/URL]
 
 
lowest they will go is 14mm thick and still convert... you might wana check to see if your wheels have pockets on the pad for the extra stud that sticks out or cut it of...
OGApril 17, 2010
#314560
http://www.wheeladapter.com/

just get something custom that's wheel and hub centric regardless of where you buy.
View original BBCode
[URL]http://www.wheeladapter.com/[/URL]
 
just get something custom that's wheel and hub centric regardless of where you buy.
AME_VIPApril 17, 2010
#314588
thanks guys. Not sure if they have pockets in the back they are 745I 19" wheels but I could ask the seller
View original BBCode
thanks guys.  Not sure if they have pockets in the back they are 745I 19" wheels but I could ask the seller
gatoApril 17, 2010
#314670
well if they dont you can get them drilled (the pockets)


if you decide to cut the excsess stud, make sure you put bolt on first so it can re thread when you take it off
View original BBCode
well if they dont you can get them drilled (the pockets)
 
 
if you decide to cut the excsess stud, make sure you put bolt on first so it can re thread when you take it off
dbragaMay 11, 2010
#320069
AME_VIP;314588 wrote:thanks guys. Not sure if they have pockets in the back they are 745I 19" wheels but I could ask the seller


Did you end up picking some adapters up? What bore are you running for the 745s?
View original BBCode
[QUOTE=AME_VIP;314588]thanks guys.  Not sure if they have pockets in the back they are 745I 19" wheels but I could ask the seller[/QUOTE]

Did you end up picking some adapters up?  What bore are you running for the 745s?
AME_VIPMay 13, 2010
#320556
I didn't end up buying them. The 7 series wheels I wanted needed refinishing so it wasn't going to be worth it in the end after buying adapters and tires.
View original BBCode
I didn't end up buying them.  The 7 series wheels I wanted needed refinishing so it wasn't going to be worth it in the end after buying adapters and tires.