ASI65X not working?

Hey people, 
Just bought a couple of these controllers from a different forum's member, and having trouble getting them working.. 
see here: [URL="http://soarercentral.com/sc-forum/messages/4570/296212.html?1299557595"][COLOR=#9c0053]http://soarercentral.com/sc-forum/messages/4570/296212.html?1299557595[/COLOR][/URL] 

Anyone got any ideas? 
Cheers

From other forums:
[QUOTE]I disconnected battery, connected controller with loom, reconnected battery, and all i get is a warning telling me to 'check air suspension' 
Car does not move up or down either with the controller or the height switch. 
I got 2 controllers, and 2 looms, and it does the same thing with everything.. 
Remove the controller and the suspension works as it should. 
The controller lights up, and seems to work, but does not effect the car.. [/QUOTE]
[QUOTE]Just checked them on the other soarer, with the exact same outcome..[/QUOTE]
[QUOTE]So, i tried: 
controller 1 with loom 1 
controller 2 with loom 1 
controller 1 with loom 2 
controller 2 with loom 2 
All doing the same thing.. 
When the wife brought home her car, it tried 1 of the controllers in her car and exactly the same thing happened.. Didn't test further as i assumed the rest would be the same as well.[/QUOTE]

Oh and i should probably say i'm trying to fit it to a 1991 UZZ31 (Soarer)
Cheers

did any US SC come with air sus that generation?

hes an aussie.

[QUOTE=brainneeded;375826]hes an aussie.[/QUOTE]

of course. most of us on this forum are in the US. if the SC's we got didn't have air suspension, then most of us wouldn't have any experience with this controller then, correct?

[QUOTE=cheez80;375849]of course. most of us on this forum are in the US. if the SC's we got didn't have air suspension, then most of us wouldn't have any experience with this controller then, correct?[/QUOTE]
ohhhhhh i c wut u did thar. you sneaky guy.

fail on me. :sad:

true... but somewhere else suggested i come here and ask... so i did :)
BUT us aussies didn't get soarers at all.. we have to import them..

Does anyone with these sort of controllers know if it could be because the car is lower than standard already that could be causing the problem?

[COLOR=#1f497d][FONT=Calibri]ARRGGHHH!!!![/FONT][/COLOR]
[COLOR=#1f497d][FONT=Calibri]well didn't have to go to work today, so got onto it again.. jacked it back to standard height.. tried it again.. exactly the same...[/FONT][/COLOR]

yeah man, i have no idea why it's not working -- when i put in the controller for my LS, it just worked magically haha. good luck, i hope you figure it out

ok, i got a ASG616A of the same bloke to try out, and everything seems fine with it.
No error code on dash and high/low switch works.
but.. [LEFT]would anyone happen to have english instructions for an R-Spec ASG616A ?? [/LEFT]