FS: Hydroholics 1 Pump 6 Dump setup COMPLETE!!

I have decided to sell my Jag and my HydroHolics setup is going to go along with it.  Everything is brand new in this set up.  Includes all listed.

1x Hydroholics Pump(with an extra tank, original had a couple dents, second is perfect!)
2x Hydroholics 3 dump manifolds w/ hydroholics actuators.
4x prepressurized Accumulators w 4 accumulator fittings.
2x actuators for pump.
2x 6 prong switches for front and rear motion, not the tall toggle switches, but sleek air ride looking switches from europe.
2x 10" hydroholics cylinders with all mounting bracketry for most any car.
2x 8" hydroholics cylinders with all mounting bracketry for most any car.
20ft of Stainless hardline with tube benders, flare kit, and all fittings to do your entire trunk.
All required hydroholics soft line for running under your car and completing the system for any car.
All required fittings for this setup are also included.
If I forgot anything OCKclass, let me know.

This is as complete a kit as you will find.  All pieces are brand new never used.

$2200 shipped for everything.

[img]http://i136.photobucket.com/albums/q194/golfkid777/PA280070.jpg[/img]

Exact same setup in action!!

[youtube]iRMkjhindJA[/youtube]

bump for a good buy!!
 
Willing to sell flaring kit and bender separately? :biggthumpup:

This is not model specific correct?

[QUOTE=widebody_Q;330465]This is not model specific correct?[/QUOTE]
 
No, the only thing needed to make it work with any make and model are things such as powerballs or heim joints, which allow it to bolt-in to factory shock locations. It just depends on what vehicle it's going on.

I have 4 ball joins that come with this setup as well, it was meant for a Jaguar x308.  And I have all four top mounting plates.  This is a great deal for someone looking to standout like OCKlasse

[QUOTE=golfkid777;330470]I have 4 [B]heim[/B] joins that come with this setup as well, it was meant for a Jaguar x308.  And I have all four top mounting plates.  This is a great deal for someone looking to standout like OCKlasse[/QUOTE]

=)

Mark, what up man? Sent you a PM! Wanna sell to someone local? =)

It's been a while man we should def chill!

Yogi, Will send you a text this evening.

Sounds good bro!

bump!!!

Offers?

Doubt this will happen, but if you ever decide to part-out, I'm interested in the manifold. No rush
 
GLWS

Not looking to part.  No one wants a complete suspension for this kind of deal?

$2000 shipped.

Bump!!

ttt

Hi is this kit ment to replace both dampers and springs and is it strictly hydralics (no suspension but stiff in every height

The accumulators provide the suspension with this. They are charged bladders that allow the hydraulic fluid a place to flex and provide the suspension.  I had them charged at a slightly higher psi so that they will ride more like coilovers allowing the car to drive lower with less suspension travel.

I rode in the owner of Hydroholics Lexus with nearly identical suspension, only he had his accumulators set to be softer and his car was smoother than my Jag was on factory suspension.

Let me know if you have any other questions man.

BUMP!!

$1700 buyer pays shipping.

Is there any way to verify if this will fit on a G50? I'm guessing I would need some additional parts (someone said powerballs or heim joints??) since you ordered it Jaguar specific. Should I call the Hydroholics guys?

After reading the juice threads, and comparing to the available bolt on air kits for a G50 (basically only air runner), I'm thinking about giving this a try. Got the cash in hand. Just gotta figure out the details (inc shipping to Hawaii 96820)

It isn't really jaguar specific..trust me, I know.  Power balls, although a great option..may not allow you to go as low as you'd like unless they are custom mounted with a lower bracket.  The heim joints are minimal in cost.

Mahalo for the info brah. Dunno if you remember me, spoke with you on a random cruise when I used to have the stock silver F50. Now I'm rocking G50. Times are haahhd! hahahaha

Would you guys worry about fitment on a G50? Or should I just suck it up, buy it, and figure it out when it's time to install?

I really want this but just don't have the funds. 

This should fit on the G50 with no problems. You have to mount the cylinder similarly how you would a strut. You just have to factor in a little extra room for the fittings on the top or bottom of the stroke. 

It is not a bolt-on affair, though. OCKlasse can probably get you in touch with someone that can build the cylinders into fully operational bolt-in struts. You'll just have to do all the plumbing.

This comes with 4 heim joints which is what you will need to make them work on a G50!! Send me a PM if you have any other questions.

Wish I had the cash. Bump for you sir.

:shrug:Is this Setup Sold Yet ???

pm'd good sir

golfkid, where are you located?

Very nice set up. I have one question, havnt the price of hydraulics went down?

So I have been slacking on selling this, but want it out of my closet.  No the prices havent gone down from Hydroholics, what I paid for this is what they are still selling for. And What I am asking is still the same.

$1700 buyer pays shipping OBO.

[QUOTE=BLACKOUT;362948]Very nice set up. I have one question, havnt the price of hydraulics went down?[/QUOTE]
This is NOT standard hydraulics...it's hydropneumatic. And these systems are not the old school type of juice and are not priced as such..no comparison between the two. I have a Hydroholics system myself and it's quite awesome.

BUMP!!

Really want to move these this week!!! $1600 shipped!!! Wont ever beat that price!!!

Get this for $700 less than retail still brand new!!

No one wants to get their car on the ground for show season?

BUMP!

$1600 shipped! Save 800+ off retail for a brand new kit!

damn...someone jump on this. I'll even offer my consulting services to help a brotha out...

$1500 shipped $1300 picked up....

Since you have been sitting on this a while, I offer $1000 shipped and you keep stainless hardline and hardline tools to pay for the shipping.

Waiting for a deposit to be put down by a local.

I can't believe no one here jumped on this.  VSC Fail...

[QUOTE=elpresidente;377439]I can't believe no one here jumped on this. VSC Fail...[/QUOTE]
 I was back in September, but I never received a reply.  I ended up buying a new laptop instead.

Still available? If anyone can inform me if this will fit the w211 chassis i may be interested ..

its universal. you just may have to get some mounts fabbed up.

sold! cant wait to pick these up

grats, i wanted these but didnt have the funds