Swagger Wagon Build.. 2011 Toyota Sienna

Just thought I share what I have been working on here in Hawaii for the past month. 

I may not be building my own rides but I am still active in helping friends build there rides. 

My Current Project is the 2011 Toyota Sienna Van "Swagger Wagon" 

I am helping in this build with farbricating the Air Ride Suspension 

We will be using UAS bags with custom mounts with an Accuair Air Managment system. 

Hope you guys all enjoy watching this build! 

Its always nice to start with a brand new ride. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/315893_2360830338363_1178444336_2824279_425375_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/300475_2360843178684_1178444336_2824299_1981389_n.jpg[/IMG]

Lines ran to front 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/320534_2367443663692_1178444336_2831896_319425655_n.jpg[/IMG]

Wires going in 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300610_2367450303858_1178444336_2831899_1258493305_n.jpg[/IMG]

Compressor going under the van 

[IMG]https://s-hphotos-iad1.fbcdn.net/hphotos-ash4/315881_2367453783945_1178444336_2831900_1790848838_n.jpg[/IMG]

[url]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/301448_2378430898366_1178444336_2840881_2112517352_n.jpg[/url]

Van stripped

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/301504_2367460104103_1178444336_2831904_984567249_n.jpg[/IMG]

I used the OEM struts.. with UAS bags and Forjworks Bracket System.. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320322_2415057013996_1178444336_2874970_1846611548_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/300591_2415142696138_1178444336_2875008_863409924_n.jpg[/IMG]

Cutting the OEM perch off

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/293171_2416871779364_1178444336_2876220_1849993793_n.jpg[/IMG]

Welding up the Forjworks bracket system 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/296315_2416873139398_1178444336_2876222_265461542_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/293586_2416876219475_1178444336_2876225_1342408285_n.jpg[/IMG]

This is the upper bearing the van uses... had to have a custom bearing made.. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/314413_2415237298503_1178444336_2875126_1647346845_n.jpg[/IMG]

First i made this but didnt work out 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/317539_2422096149970_1178444336_2879869_2026042804_n.jpg[/IMG]

SO made these 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/302519_2429834303419_1178444336_2887735_752454173_n.jpg[/IMG]

Strut Mounted 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/309786_2429796382471_1178444336_2887699_1552361087_n.jpg[/IMG]

Fitting the back wheels before he orders his actual wheels.

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/304632_2429516495474_1178444336_2887513_915495161_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/297344_2429537495999_1178444336_2887522_195587244_n.jpg[/IMG]

Air Managment going in.. 

Accuair 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/320287_2468553591377_1178444336_2920601_359444081_n.jpg[/IMG]

[IMG]https://s-hphotos-iad1.fbcdn.net/hphotos-ash4/302283_2468566711705_1178444336_2920603_1674899510_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300897_2468578552001_1178444336_2920606_1133818169_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/302634_2468584232143_1178444336_2920607_504418220_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/303068_2474664584148_1178444336_2924917_1239315445_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/310509_2477374451893_1178444336_2927229_1730837954_n.jpg[/IMG]

Wow!!

Nice! Too bad my wife don't want me to touch our sienna lol

A new Sienna!!! That would be a epic  display on the showroom floor @ the Toyota Dealer I work @ :turborant2:

damn very nice... neeed moooorreee update=)

:cool2: would love to see the new Sienna done up.. definitely following this thread..

Nice

Love the teaser already! Good luck and Godspeed w/ the project sir!

I was just talking to a homie of mind about the new sienna..subscribed...can't wait for the end results...

"Your sister is hot but your mom does that thing with her tongue"

Dope Shit

Dope!! Subscribed!!!

daaaaamn! can't wait to see more!

damn!

AWESOME  I love the stlying of the new siennas

this is exciting!

Another pimp project coming out of the Eight08Customs/Forjworks stable.  Wish that were my ride.........but its all g cause if I ever get my hands of new Sienna you will have a couple under your belt.

Notice that you have removed the rear altezza lights.  Please tell me they are going to be replaced with Red and Clears.  The only two things I would change on the SE are the tails and grill.  I also notice that the emblems have been removed........replacing with some bling?  Or a new product from Forjworks?

Most definately keeping an eye on this thread.  

Sukoshiyoshi

Forgot one more thing.......that fittmet is right on.  That is the exactly what I will be going for.  Please take note of the offsets and tire size for me.  Any Fender Roll or Pull?  

Sukoshiyoshi

Damn this is dope & the fitment shot it sex:biggthumpup:

subscribed

wow!!!

need more updates

[QUOTE=Roddogg;418006]need more updates[/QUOTE]

what he said....at least pics of the wheels...

Sorry guys no updates ... Just want to Congatulate JON "Da owner of Swagger Wagon and Auto Customs" on there new born Twins! 

Thats the latest mod to Swagger .. The next update i think will be next month at WEKFEST Hawaii.

[QUOTE=sukoshiyoshi;416611]Forgot one more thing.......that fittmet is right on.  That is the exactly what I will be going for.  Please take note of the offsets and tire size for me.  Any Fender Roll or Pull?  

Sukoshiyoshi[/QUOTE]

Yoshi no worries this is jons van of Auto Customs.. just hit him up with your ready..

Here are some pics of the van almost done but the wheels are still on order.. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/316703_192051184206015_103795196364948_410894_773855606_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/295785_192050947539372_103795196364948_410883_1759947441_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/301435_192050997539367_103795196364948_410885_419532286_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/315827_192051037539363_103795196364948_410887_2001083563_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/300121_192051070872693_103795196364948_410889_2127020465_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/310780_192051107539356_103795196364948_410891_513802443_n.jpg[/IMG]

Those of you that may want to bag a Sienna we had to make this custom upper bushing and top bag mount to replace the OEM brng. Without this the UAS bag wont work.. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/314640_192052440872556_103795196364948_410900_1271370795_n.jpg[/IMG]

I definitely cant wait to see the finish product and congrats to the proud Mom and Dad...

When is WEKFEST next month?  I may actually come out to check this ride out in person.

Sukoshiyoshi

damn i love these new siennas. cant wait to see it finished

hows the accuair working out? is that the one that has 3 different auto levels?

My dad just got a Sienna. But dayumn! this is really nice

that sienna looks sick ! cant wait to see it with rims !!!!!!!

Tooo bosss!

[QUOTE=1cleanM;420720]that sienna looks sick ! cant wait to see it with rims !!!!!!![/QUOTE]

X2:dance:

Working at a Toyota dealership, I knew these things would look good on the ground. Cant wait for the final product! Keep it up.

this may not go that far. his thinking about pulling the bags out and going stock

[QUOTE=sessions-usa1;421063]this may not go that far. his thinking about pulling the bags out and going stock[/QUOTE]

Oh really..

say it isn't so..............

when is WEKFEST?  If this ride is going to be there I may actually pay to go to a Car Show.

Sukoshiyoshi

And than there was 2 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/387772_2652263984022_1178444336_3050629_278891667_n.jpg[/IMG]

Ok guys here goes anouther install by Forjworks. 

This is the same set up as the First 2011 Seinna Van. FORJWORKS Airride Systems Kit. The only thing thats differant is the air management. Customer wanted the basic Manual paddle switches set up. 

THis by far is the quickest install even though we stold our time.. and stretched out for a 2 week span..the hour put in added up to less than a day.. 14hours install time with all the custom fabricating to modifying and building the suspension. The UAS set up is probably the hardest set up to install. becuase off all the fab work.. 



Anyone interested in a 2011 Toyota Sienna SWAGAIR kit its not on our website but we can put togther a kit for you. But the only thing is cutting and welding of the fornt strut. and wires are included but Harness is something we do when we do the install.

To start here is the Guages.. Dakota Digital 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/384264_2661031723210_1178444336_3056151_109622341_n.jpg[/IMG]

Like all of our wiring we like to make a harness.. Its take a little more time but clear install with out all the tie strap. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/393265_2661038363376_1178444336_3056157_2144018674_n.jpg[/IMG]

We alway like to keep thing looking OEM and stealthy.. WE installed Paddle switches in the blank OEM switch holes. a little cutting and grinded but the end product is this

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/386648_2661375051793_1178444336_3056560_1802115227_n.jpg[/IMG]

Again Forjworks wire harness 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/375801_2661756941340_1178444336_3056876_1119152097_n.jpg[/IMG]

Again as much as possible ... IMO these guages dont need to be for everyone to see. and its an eyesore when i see it right smack in the middle of the dash.. Van has a millon cup holders so looseing one wasnt an issue.. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/374113_2662250393676_1178444336_3057243_2128461013_n.jpg[/IMG]

Like always at forjworks we try not to bolt things to the floor pan when doing under car installs. Custom Fabricated rack is made and bolted in.. and the most amazing thing is we didnt seld this rack onto to van nor did we drill a hole right through the floor.. I'll share on how to do this in anouther topic..

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/318695_2672042918483_1178444336_3061106_1803282611_n.jpg[/IMG]

All the mounting bolts for thank and comp are welded in for ease of install.. all you need is one wrench 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/391101_2675517125336_1178444336_3062005_65783965_n.jpg[/IMG]

Installed and wired

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/314905_2676153221238_1178444336_3062052_162731288_n.jpg[/IMG]

Front struts getting read to get cut up for our FORJWORKS bracket system for use of UAS bags

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/313172_2676219262889_1178444336_3062073_1155027214_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/381333_2676246943581_1178444336_3062085_1503308161_n.jpg[/IMG]

Now its a FORJWORKS Strut! 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/317498_2676713555246_1178444336_3062202_73294732_n.jpg[/IMG]

Our Bracket System

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/310341_2676758236363_1178444336_3062215_1821769392_n.jpg[/IMG]

This is what makes this strut work.. FORJWORKS designed top plate.. with out this this set up wont work porperly. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/320026_2676757476344_1178444336_3062214_1787408418_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/378166_2676759676399_1178444336_3062216_231513269_n.jpg[/IMG]

Fronts installed

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/317526_2676784157011_1178444336_3062239_1912510459_n.jpg[/IMG]

After fabricating the rear mounts it is all bolted in.. Note if any of you try this the top bolt is a pain in the azz.. if you saw it you would wonder how the heck did we get the nut on with so little space.. 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/378767_2676712035208_1178444336_3062201_508093884_n.jpg[/IMG]

Van Done!!! 14 hours later! 12am Thanks Giving day! 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/387418_2677027163086_1178444336_3062299_1584901995_n.jpg[/IMG]

The only step left is getting the wheels on for WEKFEST! and that we have to save for the show.. Sorry guys we will post the finsihed pics after wekfest.

the grey one with the oem kit looks awesome

Oooo, the swagger wagon is gonna look hawrd!

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/s320x320/304193_2695686429556_1178444336_3070091_3698513_n.jpg[/IMG]

#swag

Nice install. Makes me wanna redo mine.

Damn Im a hater this van is so sweettttt.

[img]http://distilleryimage2.instagram.com/098b0e541ea811e1a87612313804ec91_7.jpg[/img]

I just came....

sick!

damn nice!!!

Very nice....where was the photo taken?  Also when is Wekfest?

Sukoshiyoshi

lol you missed it bro!!! 

[QUOTE=sukoshiyoshi;426556]Very nice....where was the photo taken?  Also when is Wekfest?

Sukoshiyoshi[/QUOTE]

Here is the 2 Swagger Wagons.... onos and Dos 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/388192_2747967616553_1178444336_3089096_389302948_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/376174_2747963976462_1178444336_3089094_355553616_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/387794_212588665485600_103795196364948_459626_1655541618_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/383988_212588175485649_103795196364948_459623_1787112947_n.jpg[/IMG]

They look exceptional definitely need more pics of the XLE or Limited...what are the wheels on Sport???

wow nice!!

like em both!

Tastefully done ...

"Your sister is hot but your mom does that thing with her tongue"

Both sick!

[img]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/383988_212588175485649_103795196364948_459623_1787112947_n.jpg[/img]

new desktop!

^you must have a small ass screen for a 960 to fit.

Sick rides, I love the wheels on the darker one.

hahaha nice license plate, I have to say I prefer the darker colored one by a fair margin

Looks sweet!
 
I am a sucker for the HR3s though, my tell is my sig lol....got anymore shots of that one too?

What are the wheels specs? Look like 20s

Looks amazing

Just wow all around!.

So sick!!! Can i please get a feature of these two swagger vans! haha :giggity:

Looks dope,I think those wheels are Vossen CV3..

[QUOTE=JN.FYC;426712]So sick!!! Can i please get a feature of these two swagger vans! haha :giggity:[/QUOTE]

Pm me

I missed Wekfest huh?  Shows how out of the scene I am.  LOL  Wish I could of seen these Wagons in person.  I guess I will just swing by Auto Customs to check it out in person.

Much props Marshall both looks straight pimpin.  Maybe if and when I get a Sienna we can add a White one to the Family.........got to drive the Egg into the ground before jumping on a new Sienna.  They got a White Limited on Craigslist local here in Hawaii.  So tempting.......

Sukoshiyoshi

[QUOTE=F.L.S.;426649]^you must have a small ass screen for a 960 to fit.

Sick rides, I love the wheels on the darker one.[/QUOTE]

i have it centered. i have too many icons on my desktop, it would just cover it up. :shrug:

Do they have coils for the SE yet? Reason I asked i just bought one lol. Shit is badass but i dunno if i can daily the van on air.

I can't even handle this. I'm looking at the one on the 5-spokes and I can't handle it.

"Good work" doesn't even cut it. Damn.

[QUOTE=icenpinki;428786]Do they have coils for the SE yet? Reason I asked i just bought one lol. Shit is badass but i dunno if i can daily the van on air.[/QUOTE]

not yet be at the rate this is going I think we can get coil overs made for these vans.. Huge interest in bagging these vans.. we are going to try to get AIRREX to build a kit.. IF they do coilovers will become availible.

dope:biggthumpup:

Sik stuff Marshall!!!

I like the direction you guys are going with forjwokrs.

The ruckus you guys did with air also was off the hook.

Is the front on air also on the ruckus or just the rear??

i want to have kids just to buy one. :sad:

^i may be able to help you with that

[QUOTE=BAHC;428878]^i may be able to help you with that[/QUOTE]
the fu....


:saiyancrunks:

[QUOTE=6SEVEN1;426679]What are the wheels specs? Look like 20s[/QUOTE]

curious as well if you don't mind sharing.

[QUOTE=eight08customs;428827]not yet be at the rate this is going I think we can get coil overs made for these vans.. Huge interest in bagging these vans.. we are going to try to get AIRREX to build a kit.. IF they do coilovers will become availible.[/QUOTE]

Yes please ask them to make coilovers. Lol I wanna lower my SE. I got 20s on it right now and it needs to be lowered. Air is really out of the question for me too lol.

[QUOTE=Forte EXE;421007]Working at a Toyota dealership, I knew these things would look good on the ground. Cant wait for the final product! Keep it up.[/QUOTE]
 
 
 
I said the same!!!!!

Set of Futura Brakes would set it off!

[QUOTE=icenpinki;429427]curious as well if you don't mind sharing.[/QUOTE]

its 20s.. i dont know for sure on the width. and offest.

Any luck with AIRREX building a kit?  I sorry never had a chance to come and swing bye.  Kind of crazy right now with work and baby.  I'll hit you up some time.  Been searching for the Sienna twins but have yet to see either.

Sukoshiyoshi

[QUOTE=sukoshiyoshi;432503]Any luck with AIRREX building a kit?  I sorry never had a chance to come and swing bye.  Kind of crazy right now with work and baby.  I'll hit you up some time.  Been searching for the Sienna twins but have yet to see either.

Sukoshiyoshi[/QUOTE]

Just for you 

AirREX Was asking. but still dont know becuase they dont have the van in Taiwan

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/429050_361819873830398_100000071656817_1428825_309952345_n.jpg[/IMG]

Mahalo for the photo.  Looks killer!  I go back to work from parternity leave on the 2nd.  Can I still ask is you will be able to move my air system?  Also my current compressor is still working but takes a while to fill the tank.  Might be time to replacw the compressor.  Let me know when would be good with you.

Mahalo,

Sukoshiyoshi

[QUOTE=sukoshiyoshi;435053]Mahalo for the photo.  Looks killer!  I go back to work from parternity leave on the 2nd.  Can I still ask is you will be able to move my air system?  Also my current compressor is still working but takes a while to fill the tank.  Might be time to replacw the compressor.  Let me know when would be good with you.

Mahalo,

Sukoshiyoshi[/QUOTE]

Congrats you had a baby?? 

MOve? to where? 

Yes we can swap out the compressors... call me head to osaka next week

[url]http://youtu.be/UEXHadVEihA[/url]

Nice clip!  Sent you a pm.

Sukoshiyoshi

Looks clean good job!

One day, I will buy this van for my fams.  Ít's getting bagged too...haha

Holy crapper that's hot.

This thing is crazy,  I'm in love

Finally saw it the other day.....but it didn't have wheels and was on stockies and was 4x4 height.  Had the Auto Custom sticker.....do you know what happened?

Sukoshiyoshi

wow, this thing is NICE. i know they're already loaded out of the factory but this just completes it in and out.

Damn, x10. Later.

[QUOTE=sukoshiyoshi;444198]Finally saw it the other day.....but it didn't have wheels and was on stockies and was 4x4 height.  Had the Auto Custom sticker.....do you know what happened?

Sukoshiyoshi[/QUOTE]

NEW WHEELS comming.. You know if your the owner of a wheel shop.. you have to have more than one pair of shoes

Sweet.....looking forward to the new look.  

Sukoshiyoshi

i have a swagger wagon as well but with no swag. :pat: Lets see some updates.

Just to let you guys know AIRREX has an kit avalible now..

this is a sick looking van i think i need a doc ")

Good to know AIRREX has made a kit.  Hopefully if I get one I can hit you up.

Any updates on the new shoes for the original swagger wagon?

Sukoshiyoshi

Can get more info on the Airrex kit?

Any updates on the new shoes for the swagger wagon?

Sukoshiyoshi