*NEW* BC Racing Y33 Coilovers w/ Spindles! *No Welding*

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/31685b49.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/31685b49.jpg[/IMG][/URL]

New release! Y33 coilovers with spindles included. Special order (usually ~3 weeks to your door). No core!

[B]$1150 SHIPPED.[/B] 48 states. TX residents add tax.

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/3ba72495.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/3ba72495.jpg[/IMG][/URL]

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/13d9313d.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/13d9313d.jpg[/IMG][/URL]

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/63680b6d.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/63680b6d.jpg[/IMG][/URL]

12/10, -20mm.

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/5c570e25.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/5c570e25.jpg[/IMG][/URL]

14/12, -40mm.

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/80-9018-16.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/80-9018-16.jpg[/IMG][/URL]


[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/156475_3887683130446_480522405_n_zps86c8fe9f.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/156475_3887683130446_480522405_n_zps86c8fe9f.jpg[/IMG][/URL]

18/16K, -80/90mm (shortest dampers available, no warranty). More thread to go.

i imagine these will sell like hot cakes.

i imagine you're right. i found out about them yesterday and have a couple serious buyers already.

its about mofo time!

damn thats cheap and no core, WOW!!

Sweet:dance:

that's a deal!

wow, that price is ridiculous. i wonder if they go low, though

[QUOTE=BAHC;418451]i imagine these will sell like hot cakes.[/QUOTE]

no they will sell to PANCAKES!

wait, what happens when they run out of spindles

[QUOTE=cheez80;418496]wow, that price is ridiculous. i wonder if they go low, though[/QUOTE]
 
it's bc, if they don't go low enough order custom specs. i just need to get a set installed for baseline.
 
[QUOTE=Kouki Monster;418498]no they will sell to PANCAKES!
 
wait, what happens when they run out of spindles[/QUOTE]
 
these are not oem spindles from what i understand, they are bc made. apparently the ae86 coils are similar (bc made spindles) and they have had no issues with them.

Nice :biggthumpup:

i think id rather spend an extra couple hundred to get these WITH spindles as opposed to the megans...

in for one!  :dance:

:giggity::giggity::giggity:

[QUOTE=OG;418519]it's bc, if they don't go low enough order custom specs. i just need to get a set installed for baseline.[/QUOTE]

let me know, i'm curious haha

ill buy a set

I wanna see how low these go, compared to pbm

how low they'll go really isn't an issue, it's just a matter of figuring out what changes need to be made from the out-the-box dimensions. bc has no issue with me ordering silly damper lengths, custom spring rates, etc. looks like i should have a set installed locally within a month or so.

Curious to see these installed...hopefully the customer wants to ride loooowww lol
In for pics! Props to BC for putting this on the market.

[QUOTE=ni5mo240;418696]I wanna see how low these go, compared to pbm[/QUOTE]
+1 :shrug:

Will the fronts work on a F50? If so, I read all I need to get the rears to fit would be 97-01 prelude lower rear cups. Also do you reccomend any custom rates for the heavier F50 for a comfortable ride?

What would a kit for a UCF10 run?
These go super low, right?

Awsome new for Y33 owners ... 
 
tried to get KSP to do this 2 years ago ... :slap: the said there was not a market for it ... fools

[QUOTE=BOOSTi;420075]Will the fronts work on a F50? If so, I read all I need to get the rears to fit would be 97-01 prelude lower rear cups. Also do you reccomend any custom rates for the heavier F50 for a comfortable ride?[/QUOTE]
 
I'm sure it could be made to work, although having the spindle may complicate things in this case. the non spindle y33 coilovers work but because you retain the oem spindle the brake/tie rod/lbj/etc. aren't an issue. you would need to compare y33 spindles to f50 spindlles to make a decision. for the rears i would just run z chassis true coils.
 
i've rode everything from 8-18k on these cars and honestly, using a quality coilover, you won't see a lot of variation ride quality wise. at least i don't. i usually justt get a feel for what the customer intends to do ride height wise and ballpark it from there.
 
[QUOTE=Goon60;420104]What would a kit for a UCF10 run?
These go super low, right?[/QUOTE]
 
$1k shipped. if they don't go low enough we can custom order them to go lower. but yeah, they'll get you low for sure.

Sounds good.
Shopping around right now, so far BC sounds like the best bang for the buck.

I'm in if they can tuck a 19" I'll wait to see pics OG.

How much shipped to NY?

I love the PBMs but chopping up suspension isn't what I want to do.

[QUOTE=Goon60;420238]Sounds good.
Shopping around right now, so far BC sounds like the best bang for the buck.[/QUOTE]
 
i definitely believe so based on my experience.
 
[QUOTE=4DGS;420276]I'm in if they can tuck a 19" I'll wait to see pics OG.
 
How much shipped to NY?
 
I love the PBMs but chopping up suspension isn't what I want to do.[/QUOTE]
 
The $1150 shipped price is good to all 50 states.

IN! 


I'll wait on the photos of when you get them installed (make sure you max em out for me) and then I'll probably buy.

Knowing BC they WILL go low enough. I've never installed a set of their coils that didn't slam the car.

This my be a silly question....but will UAS bags fit on these? I'm definitely gonna be in market for some coils this winter.

now you could run these on a y34 and just use the z32 rear mounts, eh? and i JUST got done ordering megan y33 coils and rear mounts for like $900.

[QUOTE=DIRTYATL;420540]This my be a silly question....but will UAS bags fit on these? I'm definitely gonna be in market for some coils this winter.[/QUOTE]
 
yes.
 
[QUOTE=the_coupe;420583]now you could run these on a y34 and just use the z32 rear mounts, eh? and i JUST got done ordering megan y33 coils and rear mounts for like $900.[/QUOTE]
 
this is discussed like 4 posts up. until someone does it no one will know the cross compatibility.

I am saving up for these now! Saves me th hassle of trying to find used spindles for spares.

OG, you have a part number on these?

same part number as the weld ons, just has to be specified with spindle.

BC is silly on the phone. They always tell me different shit lol

How long till pics on a car?

And does that mean they are the same price? Or is there just an added price w/ spindles?

I'm curious about this, too. I'm thinking these with Swift springs and the smaller cartridges.

[QUOTE=4DGS;422091]BC is silly on the phone. They always tell me different shit lol
 
How long till pics on a car?
 
And does that mean they are the same price? Or is there just an added price w/ spindles?[/QUOTE]
 
the first set should be on in about a month. sema kind of delayed everything. the spindles version adds $150 vs. the weld on.

Updates?

killed the only bit i had drilling out the caliper hole today. tomorrow i will be more prepared.

Pictures added. Don't forget, custom specs at no extra charge!

how high of a spring rate can BC go? 18kg/mm?

Higher, but I'm not sure where it maxes out. I order 18k regularly. There's also going to be the issue of how short you can get in what rate if you want to do short dampers. Just LMK what you're looking for and I'll see what I can do.

[QUOTE=OG;437809]Higher, but I'm not sure where it maxes out. I order 18k regularly. There's also going to be the issue of how short you can get in what rate if you want to do short dampers. Just LMK what you're looking for and I'll see what I can do.[/QUOTE]

i'll send you a pm tomorrow

Are shorter dampers a no cost option?

Thanks for the update. Really good seeing pictures of the actual coil overs, and a car with them installed.

that is correct. expect to see more sets with different customization soon.

Good deal!  I'm curious as to how low they can go without the "extreme drop" option.

extreme drop is really just a standardized custom spec. the pic posted was the equivalent of an extreme drop kit. without it, the car would max out .75-1" higher. it's really not as extreme as they'd you believe. i'm working with bc to see exactly how far we can go with it.

If you can, lmk how much shipped to HI =)

Noon question I'm sure (still learning platforms and whatnot), but will these work on the Y34? I know the suspensions are similar


-Sideways the Seven

fronts bolt it, rears require modification and z33 bottom mounts iirc

In the market for some new coils. Still a 3 week turn around on these?

[QUOTE=brainneeded;445969]fronts bolt it, rears require modification and z33 bottom mounts iirc[/QUOTE]
 
Hmm.. The fronts are more what I'm after as I really don't want to hack up my stock struts/spindles. Going to have to check into what all needs to be done to the rears.

[QUOTE=naes;445941]If you can, lmk how much shipped to HI =)[/QUOTE]
 
$1150 shipped.
 
[QUOTE=Tony Two-Tone;445960]Noon question I'm sure (still learning platforms and whatnot), but will these work on the Y34? I know the suspensions are similar
 
 
-Sideways the Seven[/QUOTE]
 
i can not confirm compatability of the spindles. the weld in version will work.
 
[QUOTE=Battleroyale;445984]In the market for some new coils. Still a 3 week turn around on these?[/QUOTE]
 
yes. bc racing na does not stock them yet so all orders come straight from taiwan. just as well though, they should be custom spec'd anyway imo.

Hmm.. Not sure if I'm willing to take the chance of them not working. 
 
I know you're in Houston, if I order some can I send them to you for welding? I know there are places around here that can do it, but I'd feel more comfortable with someone who has experience with them.

[QUOTE=Tony Two-Tone;446067]Hmm.. Not sure if I'm willing to take the chance of them not working. 
 
I know you're in Houston, if I order some can I send them to you for welding? I know there are places around here that can do it, but I'd feel more comfortable with someone who has experience with them.[/QUOTE]
 
you'd be better off taking them to local shop, or driving to houston, so that the car can be on hand for fitting. where you cut will affect the ride height and i don't have a baseline measurement to work with.

Hmm.. I knew you'd say that. I'm going to see if there are any local shops that can handle this for me. I know we have a few F50s in the area on coils, going to see if I can track them down. If not, I'll be making the drive down.

[QUOTE=OG;446055]$1150 shipped.[/QUOTE]

I'll start saving! I'll get back at you og when I'm ready to put in my order.

have any instock? ive been searching intill now "hopefully" lol i need it shipped to me by next friday the 14th to texas 76111 can you do that pm me asap!

What spring rates have you seen ordered? Any recommendations? Not looking to go too low just want a nice sporty but smooth ride.

The only set I've received is the 14/12 posted. I have recently ordered another 14/12 with a shorter damper for a conservative static setup locally, as well as a 16/12 short damper setup for a customer from VSC. No feedback yet though. Honestly I use the same couple spec sets, depending on your goals, accross all platforms unless the customer requests otherwise. Haven't had any complaints yet.

Newb question but there's so much talk of how versatile they are, do these things just bolt right in to a plane jane Y33?

yup.

what spring rates would you order if youre planning on going UAS later?

The bag would replace the spring so it wouldn't matter.

[QUOTE=bob_sagat;450961]The bag would replace the spring so it wouldn't matter.[/QUOTE]

oh really...thanks. what rates would you do to ride low? 18/22?

it does matter because if you valve it too high it won't be matched to the bag, which will most likely have a lower effective spring rate. there's really no conversion to help get a specific number because spring rate and psi are different types of measurements, but what i do is run a low to mid teen rate. the ones on the first page are 14/12 and will be getting the uas treatment.

So I've been back and forth with bc they say our cars have 2 different caliper bracket bolt size. it's either an m12 or m14. Can anybody confirm this?

14mm. this issue has been resolved and the coils are shipping with 14mm holes. not sure who or why you're going back and forth with.

I am very interested in these coils but can you send me a PM beacause my outgoing PM's haven't been working to my knowledge

pm received and replied. been selling a lot of these.

just got a y33, what do you recomend to drive low on 19s?

define low, as in x inches of ground clearance. low, like "comfortable", is very open to interpretation.

Low enough to tuck a bit of rim on 19s, prob stiff spring rates.

update with pic of another setup. if you've ordered these coils from me and have pics send them to me please.

Are these stocked now in the US? or is there still a 3 week turn around?

Mine arrived yesterday will send ya pics when I install them.

[QUOTE=ViruzOne;459691]Are these stocked now in the US? or is there still a 3 week turn around?[/QUOTE]

still special order. honestly, unless you want a very conservative drop the stock setup is lacking anyway. i've gone as far as 60mm short dampers and have a feeling there's still a little more to go.

support vsc vendors. 
support OG.
pls pm me a price for my friend's Y33 coilovers shipped to 96816 (with spindles, and M14 bigger hole for brk calipers)
USPS snail mail is fine, he's in no rush

pm sent.

[QUOTE=OG;461371]pm sent.[/QUOTE]


We discussed pricing on battle version components. Wondering if you can pm me a deal with all the battle version parts plus the bc Coilovers w/ spindles? Or would  this be from different vendors? would we have to do some sort of drop ship? 

Thanks!

i'm bound by map/msrp on both lines (i already sell at the lowest authorized price). some vendors chose to ignore this, however i believe in maintaining the value of the product even if it costs me a sale here and there. both will come directly from the manufacturer and both will ship directly to you. the battle version parts will drop ship, the bc coilovers will be a special order from taiwan,

[QUOTE=OG;462523]i'm bound by map/msrp on both lines (i already sell at the lowest authorized price). some vendors chose to ignore this, however i believe in maintaining the value of the product even if it costs me a sale here and there. both will come directly from the manufacturer and both will ship directly to you. the battle version parts will drop ship, the bc coilovers will be a special order from taiwan,[/QUOTE]

Ok sounds good. What would be an eta if I were to purchase the Coilovers now? Looking at 2 weeks or so?

eta is 3 weeks, but may be more. these are built to order.

got my set into day and am already putting them on :dance:

[QUOTE=whabbahead9;463216]got my set into day and am already putting them on :dance:[/QUOTE]

:biggthumpup:

hey OG i think your inbox is full. how do i order?

inbox cleared. thanks for your order!

Thank you!

pm payment info if these coilovers are still available  and pm sent

pm replied.

these coilovers are built to order. at this time niether i nor bc north america stock them. just as well though, as the factory specs are not nearly aggressive enough for most of us vip heads.

Ohh man I can't wait to get my shipment in!

Just wondering, are the photos of the 12/10 maxed out?

all pics are maxed out.

donnie went in on a second setup, pics in first post. shortest dampers available (-80/90mm), 18/16k.

Mine arrived yesterday!

awesome! send me some pics when you get them installed (max low if you try it please).

will do, hopefully this week.

Got mines in Friday.. Even tho Bc sent me the stock set up I hope the drop will be close to the photos posted..

OG, what's the part number for the coils with Spindles? The site still doesn't have them posted in the applications link.

Same part number, just specify w/ spindles.

Are they different prices?

yup. +$150 for spindles.

No doubt, thanks man. Now to decide!

Can you attest to how comfortable the 18/16K rates are? For daily driving. I first started off thinking I would get 12/10... But 18/16 for max low option is always a plus.

[QUOTE=daftphunk;470589]Can you attest to how comfortable the 18/16K rates are? For daily driving. I first started off thinking I would get 12/10... But 18/16 for max low option is always a plus.[/QUOTE]

i have 20/18 and it's not bad. the ride is a bit bouncy, but it's ok

what i've been doing lately is +2k for every -20mm on these. if you jump too high you start working against yourself as far as ride height. 16/14k, -80mm is my low spec now.

are all these y33's maxed out on the specs? 
[QUOTE=OG;418441][URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/31685b49.jpg"]
[IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/31685b49.jpg[/IMG][/URL]

New release! Y33 coilovers with spindles included. Special order (usually ~3 weeks to your door). No core!

[B]$1150 SHIPPED[/B] TX residents add tax (discounted install available).

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/3ba72495.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/3ba72495.jpg[/IMG][/URL]

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/13d9313d.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/13d9313d.jpg[/IMG][/URL]

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/63680b6d.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/63680b6d.jpg[/IMG][/URL]

12/10, -20mm.

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/5c570e25.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/5c570e25.jpg[/IMG][/URL]

14/12, -40mm.

[URL="http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/80-9018-16.jpg"][IMG]http://i214.photobucket.com/albums/cc188/BLACKonBLACK98/BC%20Racing/80-9018-16.jpg[/IMG][/URL]

18/16K, -80/90mm (shortest dampers available, no warranty). More thread to go.[/QUOTE]

the first one is for sure. the second one i was told is. the last one has more to go from what i was told.

if i was going to order the 16/14k would that have a warranty?

the spring rate does not affect  the warranty but anything shorter than -40mm damper will void the warranty. if you order 16/14 without shortening the damper approriately the car will sit higher at it's lowest setting.

Would just like to post to take a second to say
I support OG and thanks man for the patience months previous. 
My -80/-90mm  18/16 setup is great. I love it. 
If anyone wants to know how low the 80/90 setup goes, let me put it this way... If the fronts -80mm were maxed out (on 19's or 20 inch wheels) (oil pan would be roughly 3.5 inches off the ground) you wouldn't be able to to turn and clear the fender without body work. 

If you were to attempt to max out the rear -90mm, the FRAME would be on the ground before it runs out of threading. 

I am saying this from personal/first hand experience.

Given that this is a vendor thread I am Not trying to jack the thread OG (sorry if this does and please delete if you see fit) but I thought maybe I could post this as a reference or atleast some useful information for someone/anyone wanting to know how low they can get on the 80/90 setup.

Here is interesting question...since the Y33 front spindle fits a Y34, would my from Y34 with welded spindle work on a Y33 front suspension? And does my rear 350z setup from my Y34 match to fit a rear on a y33?

I ask...because I might trade for a Y33 and it would be easier to swap suspension than it would be to source stock Y34 parts locally (quickly)

Edit: Nevermind, I'm an idiot. Just remembered my Y34 rear is a separate strut spring combo...Assuming this won't work.

front is interchangable, rear is not.

Hey OG did your number get changed?

i'm waiting on a replacment phone.

pm sent.....

replied.

PM sent, I'd like to buy a set:)

pm replied.

Nice ill have to take note on this


Sent from my iPhone using VIPStyleCars

im interested in them  but then again 18/16k  aint got warranty :signdammit:

it's the damper length, not the spring rate, that voids the warranty. i haven't had a single set of bc, custom or stock spec, come back on warranty if that makes you feel any better.

Pm'ed

replied.

Yes it does make me feel better I'm going to need your number again.  I mowed my phone. 3 weeks ago and just got a new one 


Sent from my iPhone using VIPStyleCars

Pm'ed


Sent from my iPhone using VIPStyleCars

Got mine yesterday, thanks again Mike.

awesome! let me know how you enjoy them.