Negative Camber thread

ok so in this thread show a picture of your setup and tell us how many degrees of camber your running... after searching for a frame of reference for a certain amount of camber (and not having that much luck) i thought this would be a good thread....
i'll start. my rear is supposedly at -6 and my fronts ???...

[IMG]http://img.photobucket.com/albums/v711/shawnthemonster/IMG_0072.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v711/shawnthemonster/IMG_0046.jpg[/IMG]

for this picture, front is 0 and rear is neg 5
[IMG]http://img.photobucket.com/albums/v223/DrifterXL01/q45%20infinit/101010-1.jpg[/IMG]

[IMG]http://farm5.static.flickr.com/4113/5056438304_bc27d6e17f_o.jpg[/IMG]

this one has all within Factory Specs. -2 -3 ish

Crazy

-8.5 rear
-6.5 front
[img]http://farm6.static.flickr.com/5187/5633918845_72ebcc202c_b.jpg[/img]

-9 rear
-7.5 front
[img]http://farm5.static.flickr.com/4104/5015947149_830a670482_b.jpg[/img]

[QUOTE=alexisthemovie;388904]-8.5 rear
-6.5 front
[img]http://farm6.static.flickr.com/5187/5633918845_72ebcc202c_b.jpg[/img]

-9 rear
-7.5 front
[img]http://farm5.static.flickr.com/4104/5015947149_830a670482_b.jpg[/img][/QUOTE]

[youtube]SSgp-IIgr4I[/youtube]

Noob question: how is camber achieved and how does it factor into offset? Not trying to muddy up or dumb down a sticky thread. If this is deemed off topic, please delete my comment and I will start a thread.

-4f
-8.5r

[IMG]http://i20.photobucket.com/albums/b209/ryanbeez/itsjdmyocamber.jpg[/IMG]

[IMG]http://i20.photobucket.com/albums/b209/ryanbeez/picc2.jpg[/IMG]

[QUOTE=ticket_target;404028]Noob question: how is camber achieved and how does it factor into offset? Not trying to muddy up or dumb down a sticky thread. If this is deemed off topic, please delete my comment and I will start a thread.[/QUOTE]

101: 
-Camber is an alignment term to tell the wheels vertical position, measured in a degree of the wheels vertical angle
-Zero camber wheels sit [] --- []
-Positive camber \\ ---- //
-Negative camber // --- \\
-Camber normally is adjusted from lower arms eccentric mounting bolts
-Aftermarket lower and upper control arms can be adjusted by changing their length, so your either pulling inwards or pushing outwards the upper portion of the wheel( upper control arm ) or the lower portion( lower control arm )
-Also some coilovers can have a camber plate that moves the struts angle, hence worth changing camber
-Camber=suspension geometry, offset=distance between the wheel mounting surface and the wheel center line 
-And with negative camber you can make a low offset wide wheel fit without extensive bodywork, if it normally sticks out.

Hope this helps :biggthumpup:

somewhere between -9 and -12.7
[IMG]http://i56.tinypic.com/2v86b5v.jpg[/IMG]
[IMG]http://i54.tinypic.com/2ngao20.jpg[/IMG]

^^wtf is camber...........?? shit is ugly

See sig, camber maxed out within oem specs. Anything more is just over kill for me. Hoewever I do enjoy seeing some of these ass shots[IMG]http://www.houston-imports.com/forums/images/smilies/datass.gif[/IMG]

[QUOTE=jeebus;405138]See sig, camber maxed out within oem specs. Anything more is just over kill for me. Hoewever I do enjoy seeing some of these ass shots[IMG]http://www.houston-imports.com/forums/images/smilies/datass.gif[/IMG][/QUOTE]
...ass shots...
Oooooh a nice phat ass.... shieet!:drool:
LOL

Got camber?
Might have gone over board with the adjustment... adjustable rucas maxed about -18

[IMG]http://i1200.photobucket.com/albums/bb327/Lord_Juzzo/HPIM4986.jpg[/IMG]

-2f  /  -10r. working on front to gain more camber..
[IMG]http://i241.photobucket.com/albums/ff205/skim350/IMAG0986.jpg[/IMG]
[IMG]http://i241.photobucket.com/albums/ff205/skim350/IMAG0912.jpg[/IMG]
[IMG]http://i241.photobucket.com/albums/ff205/skim350/qbbq.jpg[/IMG]

That shit looks broken dude LOL J/K =)  Dope!

Man when do we get our front cambers fixed? I must have my FUCA's soon, but those fucking  SPC retailers keep wasting my time aargh    :saiyancrunks:

[QUOTE=Juzzo;411792]That shit looks broken dude LOL J/K =)  Dope!

Man when do we get our front cambers fixed? I must have my FUCA's soon, but those fucking  SPC retailers keep wasting my time aargh    :saiyancrunks:[/QUOTE]

when you get the FUCAs notch the fucken shit out of the balljoint adjuster slot thing before you install them! you can thank me later! =)



im currently running less camber up front due to tire fitment issues and more camber in the rear due to going more low... but in the pics specs are: -8.67 fronts/ -11.97 rears (85mph on the highway approved)

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/301563_2008079850691_1504547044_31864189_3704050_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/299899_2012074430553_1504547044_31869818_7071916_n.jpg[/IMG]

-3.7 front and -4.7 rear

[IMG]http://i204.photobucket.com/albums/bb314/blainangus/AngusBlain162.jpg[/IMG]

[IMG]http://i204.photobucket.com/albums/bb314/blainangus/IMG_9744.jpg[/IMG]

[QUOTE=CubanGS;411815]when you get the FUCAs notch the fucken shit out of the balljoint adjuster slot thing before you install them! you can thank me later! =)
[/QUOTE]

Juzzo.  Translate this to me!  In couple months i'm going to install mines..

4DGS car lookin sexy as fuuuck!

- 4.5 front and close to -6 in the rear 
 
[IMG]http://i288.photobucket.com/albums/ll193/phillygs3/ZAN_7046.jpg[/IMG]

[QUOTE=samsa;415219] [QUOTE=CubanGS;411815]when you get the FUCAs notch  the fucken shit out  of the balljoint adjuster slot thing before you  install them! you can  thank me later! =)
[/QUOTE]

Juzzo.  Translate this to me!  In couple months i'm going to install mines..[/QUOTE]

Aquí tiene hombre =)

Chris tarkoittaa, että mikäli haluaa kunnolla eteen camberia niin kannattaa heti modata niiden tukivarsien pallonivelen kinnityskohdat. Eli käytännössä laajentaa sitä reikää "sisäänpäin", eli tästä (ooo) tähän (oooooo). Tällöin saa lisää  säätöaluetta negatiivista camberia varten ja samallahan se auttaa vetään vanteen yläpäätä sisäänpäin. Got it?

[QUOTE=projecty33;415221]4DGS car lookin sexy as fuuuck![/QUOTE]

Thanks man! :biggthumpup:

[QUOTE=Juzzo;415389]Aquí tiene hombre =)

Chris tarkoittaa, että mikäli haluaa kunnolla eteen camberia niin kannattaa heti modata niiden tukivarsien pallonivelen kinnityskohdat. Eli käytännössä laajentaa sitä reikää "sisäänpäin", eli tästä (ooo) tähän (oooooo). Tällöin saa lisää  säätöaluetta negatiivista camberia varten ja samallahan se auttaa vetään vanteen yläpäätä sisäänpäin. Got it?[/QUOTE]

Olishan toi pitänyt arvata =)

-4 front / -10 rear

[IMG]http://www.sntrl.com/wp-content/gallery/black-2/img_6299.jpg[/IMG]

fronts soon to be -8 :dance:

This thread has so much win and so much camber! lol

and so much tire wear the EPA will crack down

[QUOTE=CubanGS;411815]when you get the FUCAs notch the fucken shit out of the balljoint adjuster slot thing before you install them! you can thank me later! =)



im currently running less camber up front due to tire fitment issues and more camber in the rear due to going more low... but in the pics specs are: -8.67 fronts/ -11.97 rears (85mph on the highway approved)

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/301563_2008079850691_1504547044_31864189_3704050_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/299899_2012074430553_1504547044_31869818_7071916_n.jpg[/IMG][/QUOTE]

i couldnt pass 50mph on -8 lol

i forgot about this thread!

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/390661_2388241034483_1504547044_32117797_1149140264_n.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/542838_10150691593787272_518457271_8884129_198722363_n.jpg[/IMG]

-9 and -18
 [IMG]http://i1205.photobucket.com/albums/bb427/fullmoongs/DSC00349.jpg[/IMG]
 [IMG]http://i1205.photobucket.com/albums/bb427/fullmoongs/DSC00352.jpg[/IMG]

But now car is in for a over haul and a facelift.

[QUOTE=FULLMOONGS;445326]-9 and -18
 [IMG]http://i1205.photobucket.com/albums/bb427/fullmoongs/DSC00349.jpg[/IMG]
[/QUOTE]

this picture is MONEY!

holy shit lol

my son shall be named camber.

oh god, those fenders hahaha.  beautiful equips tho.  funny how -9 looks like -3 next to that -18

[QUOTE=FULLMOONGS;445326]-9 and -18
 [IMG]http://i1205.photobucket.com/albums/bb427/fullmoongs/DSC00349.jpg[/IMG]
 [IMG]http://i1205.photobucket.com/albums/bb427/fullmoongs/DSC00352.jpg[/IMG]

But now car is in for a over haul and a facelift.[/QUOTE]

Fucking ay, that's the SHIT :biggthumpup:

[IMG]http://i44.tinypic.com/33nkwfr.jpg[/IMG]
-2.9/-3.6 LOL

heres mine from da back
-5 all around on my car
[IMG]http://img.photobucket.com/albums/v252/xXaZnrAc3rXx/gs%20stuff/544665_205227149586636_100002980576389_362081_549874669_n.jpg[/IMG]

from VSC chat, oni camber
[IMG]http://media.zenfs.com/en/blogs/thesideshow/GoFundMe.jpg[/IMG]

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/546945_351801034870824_100001227908457_1072005_449586532_n.jpg[/IMG]

[QUOTE=Kouki Monster;445366]from VSC chat, oni camber[/QUOTE]
 
that's fucked up.

+1. but expected frpm mr.kookie lol

[IMG]http://img.tapatalk.com/c6e4deeb-d1f8-c4d8.jpg[/IMG]
[IMG]http://img.tapatalk.com/c6e4deeb-d288-8b9d.jpg[/IMG]

[img]http://brian.carnell.com/wp-content/uploads/2009/03/b[B][/B]ack-to-the-future-delorean-toy.jpg[/img]

+75 front
+90 rear

[QUOTE=OG;445423]that's fucked up.[/QUOTE]

how is that fucked up? it was posted on vsc chat. I saw oni camber. 

People say camber is bad, but they have it on wheel chairs.

Megan camber plates maxed out and about -7 in the rear
[IMG]http://i85.photobucket.com/albums/k68/biggie8321/photo4.jpg[/IMG]
[IMG]http://i85.photobucket.com/albums/k68/biggie8321/vip3.jpg[/IMG]

Studio camber adapters up front, stock arms out back right now.  Trying to get more camber in the rear obviously.  -7.2 degrees up front, -4 out back.

[img]http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/431478_792738733462_40105740_36483281_777800877_n.jpg[/img]

Really hard to tell in my iPhone pic, and I suck at pics anyhow, but my rear looks about like Jermaine's a few posts up.

Front: -5 
Rear: -6.5 


[IMG]http://i194.photobucket.com/albums/z216/kdfalk/Camber2.jpg[/IMG]
[IMG]http://i194.photobucket.com/albums/z216/kdfalk/CAMBER.jpg[/IMG]

^very nice!! welcome to the dark side!

what app is that?

damn that a dope app!

alcre8or Angle Meter (FREE)

[IMG]http://i389.photobucket.com/albums/oo331/australiano01/Q45/6798503728_059dbf4a74_b.jpg[/IMG]

-6.5 all around

more pix kev! i gotta see this!!

go to my build i have a few pics up i think, its in the 101 section

haha...yea kouki, fucked up pic!! :crunksd:

now the rears are -13
[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/223860_10150322928947269_785187268_9559808_987999_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/183861_10150263504135270_792810269_7346536_4486463_n.jpg[/IMG]
[IMG]https://s-hphotos-sjc1.fbcdn.net/hphotos-snc7/s720x720/296474_10150284315426533_542501532_8176645_254359404_n.jpg[/IMG]
and my fronts are at an insane +.01 :/

my spare =) 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/542838_10150691593787272_518457271_8884129_198722363_n.jpg[/IMG]

I know tjis is about negative camber, but still...

[IMG]http://i229.photobucket.com/albums/ee252/prerunner13/crap%20fab/Picture20088.jpg[/IMG]
[IMG]http://i229.photobucket.com/albums/ee252/prerunner13/crap%20fab/Picture20090.jpg[/IMG]
[IMG]http://i229.photobucket.com/albums/ee252/prerunner13/crap%20fab/Picture20075.jpg[/IMG]

[QUOTE=CubanGS;446728]my spare =) 

[IMG]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/542838_10150691593787272_518457271_8884129_198722363_n.jpg[/IMG][/QUOTE]

lol i did mine the other day, i lulled it was like 6.8*

Took this yesterday...

[IMG]http://i1200.photobucket.com/albums/bb327/Lord_Juzzo/HPIM5169.jpg[/IMG]

I re-checked my calculations and noticed that it ain't 17,5*, I used a wrong measurement. Sin1(158/545)=16,85 degrees of neg camber... and it's too much =)

Biggest problem with this is that I can't get much natural camber when aired out, so I had to tweak the lca adjustment to get something more suited to a daily driver. New pics and measures coming in the morning :innoutrofl2:

in the works still..
 
[IMG]http://i44.photobucket.com/albums/f17/honDA_b18/M45/camber.jpg[/IMG]

Looks good. Not too much poke. More pictures please!

still have a little work to do and itll be back on the streets! pics coming soon!

dope thread

dopr tread

-6 to 7ish

[img]http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/557910_10151001859134272_1097672839_n.jpg[/img]

[QUOTE=CrazyHawaiian;445509][img]http://brian.carnell.com/wp-content/uploads/2009/03/b[B][/B]ack-to-the-future-delorean-toy.jpg[/img]

+75 front
+90 rear[/QUOTE]

lol, i lol'd

Love this shot
[IMG]http://i179.photobucket.com/albums/w308/o2bbabe/534273_518963424784114_455410855_n.jpg[/IMG]

[QUOTE=F.L.S.;446044]Really hard to tell in my iPhone pic, and I suck at pics anyhow, but my rear looks about like Jermaine's a few posts up.

Front: -5 
Rear: -6.5 
[/QUOTE]

Will I be able to achieve this without running the PBM parts you? I'm just on BC coilovers

Here is some camber from a previous project, now dead and in the shredded for metal. Ran perfectly fine with 135k miles, but no room left to store. lol
[IMG]http://i700.photobucket.com/albums/ww4/ProjectGarage/Picture218.jpg[/IMG]
[IMG]http://i700.photobucket.com/albums/ww4/ProjectGarage/Picture220.jpg[/IMG]
Charley

^^ damn haven't seen you post in a hot minute.

Charley wats good man!!! Man I was looking forward to seeing the final outcome of your ES
Good to see you still around though

Miss u and your car Charlie real talk
Nohomo

I remember that day like it was yesterday, good times. Sad that she had to go but on to the next one..

[URL="http://img844.imageshack.us/img844/1431/78392460.jpg"][IMG]http://img844.imageshack.us/img844/1431/78392460.jpg[/IMG][/URL]

elvis, show the wheels already

Dam and they said it couldn't be done.....Wow

Here's mine from Black3.. running -4/-5 camber

[IMG]http://www.stanceiseverything.com/wp-content/uploads/2012/10/lexus_gold_rear.jpg[/IMG]

[QUOTE=roddy;467223]elvis, show the wheels already[/QUOTE]
 lol i know right! do i spy some spoke in that picture of your fronts?? no fair!

Haha, should be "unveiling" everything next month when I get back from North Carolina. Wheels are pretty common by the way, nothing special.

^ But a great choice none the less. I'd run em...

[url=http://www.flickr.com/photos/69024633@N05/8034250365/][img]http://farm9.staticflickr.com/8456/8034250365_6114bef229_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8034250365/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8034249805/][img]http://farm9.staticflickr.com/8315/8034249805_296a1a4bd8_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8034249805/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8034249566/][img]http://farm9.staticflickr.com/8031/8034249566_6e8c8bb051_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8034249566/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8034249092/][img]http://farm9.staticflickr.com/8172/8034249092_1dd97fa3fc_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8034249092/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

gaww damn!

Oh yeah!

[url=http://www.flickr.com/photos/69024633@N05/8151988495/][img]http://farm9.staticflickr.com/8062/8151988495_ddc09a6b09_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8151988495/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8151987359/][img]http://farm9.staticflickr.com/8066/8151987359_86015d2a11_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8151987359/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8152012232/][img]http://farm9.staticflickr.com/8481/8152012232_6e63275a13_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8152012232/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8151986183/][img]http://farm8.staticflickr.com/7127/8151986183_3bc603def3_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8151986183/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8151985665/][img]http://farm9.staticflickr.com/8340/8151985665_9335013efe_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8151985665/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8152010210/][img]http://farm9.staticflickr.com/8066/8152010210_93dac9712c_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8152010210/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8152009718/][img]http://farm9.staticflickr.com/8069/8152009718_39a1a9df8f_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8152009718/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

Can't wait to bring it to Dreamakers to finish this thing!

[url]http://www.flickr.com/photos/69024633@N05/8154895592/[/url]

[URL="http://farm9.staticflickr.com/8067/8155328739_29cf692ab7_b.jpg"][IMG]http://farm9.staticflickr.com/8067/8155328739_29cf692ab7_b.jpg[/IMG][/URL]

Volk! shit is fire! I cant wait to see it all dialed in!! the rolling video is tight

Volk you're still static right?

[URL="http://i1194.photobucket.com/albums/aa366/Jave6888/NewImage5.png"][IMG]http://i1194.photobucket.com/albums/aa366/Jave6888/NewImage4.png[/IMG]

[IMG]http://i1194.photobucket.com/albums/aa366/Jave6888/NewImage5.png[/IMG][/URL]

Y33 
Camber -9ish all around

Did you need to flip the tires by the time you made it home? =)

lol

Daaymn Ritz, that ish is fire :)

Heres about -6 in the rear -7 in the front. I only used Studio camber adapters up front and studio rear toe links. Car is sold though.

[img]http://i.imgur.com/B4jGA.jpg[/img]

So is this how i can force camber in the front, with camber plates, i guess it does the opposite of a camber kit? Sorry still learning.

^ camber plates ARE the camber kit. They can just adjust both ways (for both negative and positive adjustment)

this thread is filled with waaaayyy too much negative photos

Thanks

[QUOTE=4DGS;468710]Volk you're still static right?[/QUOTE]

Yep! Still static and staying that way. Can't wait to get it all dialed in. 
Bringing the car to Dreammakers custom this weekend 

[url=http://www.flickr.com/photos/69024633@N05/8195842183/][img]http://farm9.staticflickr.com/8202/8195842183_b0489f7c44_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8195842183/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[url=http://www.flickr.com/photos/69024633@N05/8196934050/][img]http://farm9.staticflickr.com/8068/8196934050_3694a779f8_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8196934050/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr


[url=http://www.flickr.com/photos/69024633@N05/8202314747/][img]http://farm9.staticflickr.com/8343/8202314747_6028be70f7_b.jpg[/img][/url]
[url=http://www.flickr.com/photos/69024633@N05/8202314747/]Untitled[/url] by [url=http://www.flickr.com/people/69024633@N05/]Martin83mac[/url], on Flickr

[QUOTE=mrbrian8;469447]So is this how i can force camber in the front, with camber plates, i guess it does the opposite of a camber kit? Sorry still learning.[/QUOTE]

[QUOTE=4DGS;469677]^ camber plates ARE the camber kit. They can just adjust both ways (for both negative and positive adjustment)[/QUOTE]

they don't make camber plates for ucf3x, due to the double wishbone suspension, you wouldn't achieve any camber by shifting the shock body.

[QUOTE=Kouki Monster;469679]this thread is filled with waaaayyy too much negative photos[/QUOTE]


why so negative...

-9.9 when i was static BUT now on air so 10 ish?? tires are gay:pat:

This is my front camber -10 with just the ikeya formula arm maxed in will be getting more negative camber once i get my rca from 326 power ;)

[IMG]http://i1356.photobucket.com/albums/q724/OGAristo/12CB51D4-E2A7-478B-A054-EF08FC15CB52-11323-000006DA13BB58BA_zps6cfb8088.jpg[/IMG]

saw an electronic mounting device for measuring camber at car meets in a new VIP mag.  couldn't tell how much it was though but if i see it again i will try to get some more details, shit looked cool as hell though and if i didn't already know i was only at -3.5 i might be more interested.

[url=http://www.flickr.com/photos/yokotas13/2111970653/][img]http://farm3.staticflickr.com/2141/2111970653_23cbedb00f_z.jpg[/img][/url]
[url=http://www.flickr.com/photos/yokotas13/2111970653/]IMG_9821[/url] by [url=http://www.flickr.com/people/yokotas13/]Flsimages[/url], on Flickr

my -9.4 rears :)

[img]http://farm8.staticflickr.com/7382/9595127375_4c1c1376ee_c.jpg[/img]

im glad I found this forum. Bump for more pics.

[ATTACH]5509[/ATTACH]
no clue how much camber i got. need alignment still to figure out how much camber i have haha.

[IMG]http://i52.photobucket.com/albums/g29/OKIBAPESTA/299058_243357275713598_1357558621_n_zps822791a8.jpg[/IMG]

Currently on -11.5 all round

[QUOTE=alpha;506940][IMG]http://img.tapatalk.com/d14/01/14/u4yjy2a5.jpg[/IMG]
Currently on -11.5 all round[/QUOTE]

cant see your photo bro

-11 F
-12 R

18´´ OZ  //// STATIC
[IMG]http://i415.photobucket.com/albums/pp234/silosfive/Untitled-1_zps08a58e97.jpg[/IMG]

Any better pics for us Pavel?

why not!
[IMG]http://i415.photobucket.com/albums/pp234/silosfive/20CELSIOR111_zpseba8c0d2.jpg[/IMG]

but video is always better :)
[video=youtube;FuJDbEk9Ky4]http://www.youtube.com/watch?v=FuJDbEk9Ky4[/video]

dope

[QUOTE=silos5;506952]why not!
[IMG]http://i415.photobucket.com/albums/pp234/silosfive/20CELSIOR111_zpseba8c0d2.jpg[/IMG]

but video is always better :)
[video=youtube;FuJDbEk9Ky4]http://www.youtube.com/watch?v=FuJDbEk9Ky4[/video][/QUOTE]
damn i've always mad love for your car, but this shit is even EXTRA gangsta

More pics please!

[QUOTE=silos5;506952]why not!
[IMG]http://i415.photobucket.com/albums/pp234/silosfive/20CELSIOR111_zpseba8c0d2.jpg[/IMG]

but video is always better :)
[video=youtube;FuJDbEk9Ky4]http://www.youtube.com/watch?v=FuJDbEk9Ky4[/video][/QUOTE]

yo this shit is clean bro


Sent from my iPhone using VIPStyleCars

[QUOTE=chrispy;506962]More pics please![/QUOTE]

sorry ... I just finished doing my suspension and some smalls mods and put the car for winter to sleep.
but I have another short video:

[video=youtube;2ZpIvfWmyVw]http://www.youtube.com/watch?v=2ZpIvfWmyVw[/video]

So dope P!

WOW EPIC

Damn!

holy crap.. and you are static at that height?

Dang......... SO COOL

Question for the Lexus LS/GS how do you get more camber in the rear? I'm currently maxed out on my adjustable arms and only getting -6 camber and I want to get at least -10

Well with the GS/SC you can put MKIV Supras adjustable RUCAs, I got -18* with just them and Cuban got -21*(???) with adjustable upper and lower arms and he also notched the RUCAs mounting points.

[QUOTE=bhsuperlow;507006]holy crap.. and you are static at that height?[/QUOTE]




Yeah he's static.

[QUOTE=Juzzo;507037]Well with the GS/SC you can put MKIV Supras adjustable RUCAs, I got -18* with just them and Cuban got -21*(???) with adjustable upper and lower arms and he also notched the RUCAs mounting points.[/QUOTE]

impossible because i got ikeya formula rear supra camber arms and i can only get -6 so the lower arm will get more neg camber your saying?

you defenately need both lower and upper arms for a full adjustability !!

Yup I'm in the process of ordering a set of nagisa auto lower arms now as we speak thanks for the help guys i wish there was such a thing as rca for the rear of our cars :([URL="http://www.nagisa-auto.com/products/toyota/jzs14_15.html"]


[/URL]

Nagisa is $$$$$ .. you can get FIGS for 1/2 a price, I guess.

For a 1GS?

oops, not for the 1GS :(

[QUOTE=OGcima;507047]impossible because i got ikeya formula rear supra camber arms and i can only get -6 so the lower arm will get more neg camber your saying?[/QUOTE]


Well yes, but you could always ditch the Ikeya arms and get something with more adjustment... Like the ones me and Cuban got. I got -18 degr. with just the upper arms and I didn't notch the mounting points...

Oh and remember that you can't use Supras lower arms. The  stock Supra lower arms are 3" shorter than the Aristo/GS ones!

[QUOTE=Juzzo;507075]Oh and remember that you can't use Supras lower arms. The  stock Supra lower arms are 3" shorter than the Aristo/GS ones![/QUOTE]

im ordering actully MK1 GS1's and what rear camber arms are you running to get -18 striaght off the bat :/

TLC arms... I think that they copied their design from some Japanese manufacturer. I've also seen different colored "no name" arms on sale some tuning shop in Finland...

[QUOTE=Juzzo;507078]TLC arms... I think that they copied their design from some Japanese manufacturer. I've also seen different colored "no name" arms on sale some tuning shop in Finland...[/QUOTE]

I ALMOST after researching bought 19x10+0 f 11+0 back because tcs made adjustable rucas but as of jan this yr they discontinued them. So unless you feel like shelling 1k plus or maybe 649 plus shipping on ikyea formulas, you better think about your options. The formulas from what i read you need to tell them if your looking for negative or positive fitment. 

So im playing it safe and sticking to the same setup but +10 all the way around. lol. Sorry negative thread i tried. i really did lol

Ended up contacting a VIP workshop in Japan that made a set of rear lower arms to push the bottom of the wheels out:

[IMG]http://i1356.photobucket.com/albums/q724/OGAristo/photo5_zps7c829e5d.jpg[/IMG]

Nice and Simple, how long is the adjustment? 

BTW what's your fitment situ? Keeping in mind that pushing the lower out doesn't help with fitment...

the aim of the game is camber ;)

Of course it is, but in this game proper fitment is also an important aspect...

Anyone that has a big body (4500-6000lbs )static setup and, lets start with high spring rates above 20kg and over -5 camber. What's yall experience with tire life?

[QUOTE=IIXtremeHansen;513164]Anyone that has a big body (4500-6000lbs )static setup and, lets start with high spring rates above 20kg and over -5 camber. What's yall experience with tire life?[/QUOTE]

I was on air but running -14 front camber with -22 rear camber and my tires looked new still, I just installed my T-Demand coils that are 45/35k rates so I'll give another update after I re align my car again to gain more camber in the front.

Yeah,  same here. Tires be taking a beating with them rates.

My old car used to run -9. Last about a year by flipping but it was a lighter car with soft rates.