Thread #4925

Air Suspension (Cylinders) for 1990-1993 Infiniti Q45

7 archived posts · 3,361 historical views

viplifeJune 14, 2007
#66739

Air Suspension (Cylinders) for 1990-1993 Infiniti Q45

It's time to clean out the garage...

I have a complete set of (4) air cylinders for the early Infiniti Q45 (1990-1993). These are EAI cylinders, with custom front lower mounts, and billet rear mounts that have been shortened to slam the car. Top mounts are OEM, and included. This is a complete swap from factory to air.

The cylinders functioned properly, when they were removed from my old car (some of you may remember)...

Forum image

They come with 3/8" brass fittings, and are relatively fast. The ride quality is not like stock, they ride quite harsh. You could use a number of solutions (accumulators) discussed in other areas of the forum to alleviate this issue. There is one good thing about their design. It's that they have a huge amount of lift. They will provide you more than any bag or air strut system can. So getting up driveways, and over obstacles with a very tall OG VIP kit like junction produce will not be a problem with these.

Forum image

Forum image

Forum image

Forum image

Forum image

Forum image

$800 plus shipping.

Here's a video of the car with these cylinders.

Forum image

Driving at very low height, and then releasing all the air from the system, at park. The banging sound is the underside of the front bumper hitting the ground. Although faint, the cylinders do make a cool sound when they release air, and "hit" their bottoms. I've enjoyed these much more than bags in terms of playing on the street.

Thanks.
View original BBCode
It's time to clean out the garage...
 
I have a complete set of (4) air cylinders for the early Infiniti Q45 (1990-1993). These are EAI cylinders, with custom front lower mounts, and billet rear mounts that have been shortened to slam the car. Top mounts are OEM, and included. This is a complete swap from factory to air.
 
The cylinders functioned properly, when they were removed from my old car (some of you may remember)...
 
[IMG]http://www.angrylife.com/temp/cyl_00.jpg[/IMG]
 
They come with 3/8" brass fittings, and are relatively fast. The ride quality is not like stock, they ride quite harsh. You could use a number of solutions (accumulators) discussed in other areas of the forum to alleviate this issue. There is one good thing about their design. It's that they have a huge amount of lift. They will provide you more than any bag or air strut system can. So getting up driveways, and over obstacles with a very tall OG VIP kit like junction produce will not be a problem with these.
 
[IMG]http://www.angrylife.com/temp/cyl_01.jpg[/IMG]
 
[IMG]http://www.angrylife.com/temp/cyl_02.jpg[/IMG]
 
[IMG]http://www.angrylife.com/temp/cyl_03.jpg[/IMG]
 
[IMG]http://www.angrylife.com/temp/cyl_04.jpg[/IMG]
 
[IMG]http://www.angrylife.com/temp/cyl_05.jpg[/IMG]
 
[IMG]http://www.angrylife.com/temp/cyl_06.jpg[/IMG]
 
[B][COLOR=red]$800 plus shipping.[/COLOR][/B]
 
Here's a video of the car with these cylinders.
 
[URL="http://youtube.com/watch?v=n5iTUHKbFWY"][IMG]http://www.angrylife.com/temp/cyl_07.jpg[/IMG][/URL]
 
Driving at very low height, and then releasing all the air from the system, at park. The banging sound is the underside of the front bumper hitting the ground. Although faint, the cylinders do make a cool sound when they release air, and "hit" their bottoms. I've enjoyed these much more than bags in terms of playing on the street.
 
Thanks.
viplifeJune 15, 2007
#66749
located in hawaii, but will ship to anywhere in the united states.

pm to buy or more information.

thanks.
View original BBCode
located in hawaii, but will ship to anywhere in the united states.

pm to buy or more information.

thanks.
VIPQ45June 15, 2007
#66903
Price? Will it fit a kouki Q45?

What else is need for the whole setup?
View original BBCode
Price? Will it fit a kouki Q45?

What else is need for the whole setup?
viplifeJune 15, 2007
#66922
VIPQ45;66903 wrote:Price? Will it fit a kouki Q45?

What else is need for the whole setup?


i sorta answered all your questions above, but ill give you the readers digest version since you couldn't read between the pictures above...

$800. No. Air mgt.

Thanks.
View original BBCode
[QUOTE=VIPQ45;66903]Price? Will it fit a kouki Q45?

What else is need for the whole setup?[/QUOTE]

i sorta answered all your questions above, but ill give you the readers digest version since you couldn't read between the pictures above...

[b]$800. No. Air mgt.[/b]

Thanks.
AcUrALiTyJune 16, 2007
#67107
check your pm
View original BBCode
check your pm
na4nowJune 24, 2007
#69025
Whats the outside diameter of these?
View original BBCode
Whats the outside diameter of these?
viplifeJune 24, 2007
#69063
na4now;69025 wrote:Whats the outside diameter of these?



4" od
View original BBCode
[quote=na4now;69025]Whats the outside diameter of these?[/quote]


4" od