HELP!!! suspension question

my boy wanna hook me up with his s14 springs from eibach to see the way it would fit on the y33. I needed to know that if they are a 1.7" drop in the front and 1.5" rear, would the front rub and what would i need to modify to make it a better look. I have 20x9.5 all around Braubus rims and i dont wanna rub and not be able to do a full u turn :( lol.

[QUOTE=C4 President;75129]my boy wanna hook me up with his s14 springs from eibach to see the way it would fit on the y33. I needed to know that if they are a 1.7" drop in the front and 1.5" rear, would the front rub and what would i need to modify to make it a better look. I have 20x9.5 all around Braubus rims and i dont wanna rub and not be able to do a full u turn :( lol.[/QUOTE]

What size tires are you running? Are your fenders rolled/cut?

Try going with 225/35 or 225/30 " tires with a rolled or cut fender.. you will be OK.

I have Tein S-tech's and I think they are set at 1.8 drop. Nice. Not as low as some of you guys prefer, but I never have any chassis clearance issues so far. I have 1 finger or less clearance to the top of the tire. If you want to go lower maybe a more aggressive S14 spring might be a better alternative, I think it was the Tanabe DF210??

I think nextgear posted not to do this as an alternative method..I think he put some on his car..

[quote=VIPete;75131]What size tires are you running? Are your fenders rolled/cut?
 
Try going with 225/35 or 225/30 " tires with a rolled or cut fender.. you will be OK.[/quote]
 
Yeah unfortunately at the moment i am running 255/35zr20. fk451's as well.

[quote=zion_97;75135]I think nextgear posted not to do this as an alternative method..I think he put some on his car..[/quote]Yea, he used stock S14 springs and they were low in the front and high in the rear. So far those Tanabe DF210's in an old Y33 thread gave a decent drop, but again I don't know how the ride was. You might want to compare the drops between those Eibach's and Tanabe's.